Overview
The Pro Comp Stage I Lift Kit 55717BRH from Pro Comp Suspension raises the vehicle 4 in. It is for right hand drive applications.
The lift height is 4 in. and the kit is for right hand drive. Check the components in the box against your installation before starting.
Installing a lift safely
A stage I lift is typically the first step in raising a truck, and it changes the suspension geometry in ways that affect steering and tire wear. Plan the install with the alignment in mind, because a lift shifts the front and rear angles even when the parts fit well.
Before starting, lay out every part and compare it with the installation steps. Keep fasteners sorted, use the torque values from the vehicle service information, and replace any worn bushings or nuts that come off during the work.
After the install, drive the truck at low speed on a familiar road and listen for rubbing, clunks or steering wander. Re-torque the hardware after the first few drives and recheck tire clearance at full lock.
- Alignment scheduled after the lift
- Hardware re-torqued after the first drives
- Tire clearance checked at full lock
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 55717BRH |
| UPC | 614901129830 |
| Lift height | 4 in. |
| Steering | Right hand drive |
| Kit type | Stage I lift kit |
Vehicle fitment
Confirm fit for the year, model and steering side of your truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 4 in. lift changes suspension geometry, so have the alignment checked and the driveline angles measured after installation.
What’s included
Check the package contents against your installation before starting.









