Select your vehicle

Pro Comp 3.5″ Lift Kit with PRO-VST 2.5″ Coilovers and Shocks with Rear Coil Springs – K5098BX

Pro Comp Suspension

Shop Toyota 4Runner Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 3 to 3.5-inch lift kit with 2.5-inch PRO-VST coilovers and shocks
  • Includes front and rear PRO-VST shocks and rear coil springs
  • Vehicle-specific tuning for 33-inch tires on 17-inch wheels
  • Fits 2003-2024 Toyota 4Runner and 2007-2014 FJ Cruiser

Description

Overview

The Pro Comp 3.5-inch Lift Kit with PRO-VST 2.5-inch Coilovers and Shocks, part number K5098BX (EXPK5098BX), is a 3 to 3.5-inch lift for the Toyota 4Runner and FJ Cruiser. It fits 2003 to 2024 4Runner models and 2007 to 2014 FJ Cruiser models, and it covers the FJ Cruiser through 2014, the broader of the two kits.

The PRO-VST coilovers and shocks are tuned for 33-inch tires on 17-inch wheels, the wheel and tire combination that gives optimal results. The package has front and rear PRO-VST shocks, 2.5-inch coilovers and rear coil springs. The lift height range is 0 to 3.5 inches, and the kit improves travel and rebound while keeping ride closer to stock.

Key features

  • 3 to 3.5-inch lift
  • 2.5-inch PRO-VST coilovers
  • Front and rear PRO-VST shocks included
  • Rear coil springs included
  • Tuned for 33-inch tires on 17-inch wheels
  • Bolt-in design, no frame modifications

Choosing a lift for your tires

Lift kits are usually matched to a planned tire size, since a larger tire needs more clearance at the fender and suspension. The tire size and wheel width should be settled before the lift is chosen, because the wheel offset affects how close the tire sits to the body. A tire that is too large can rub even on a lifted truck, so measure clearance with the suspension compressed and the wheels turned.

Coilover and spring kits change ride quality, so consider how the vehicle will be driven. A lift with stiffer springs suits heavier loads, while a softer setup may suit daily driving. Expect some change in steering feel and braking after the lift, and check the brake lines and steering linkage for stretch or wear during the first months of use.

  • Settle the planned tire size before buying the lift
  • Measure fender clearance with the wheels turned
  • Recheck steering and brake lines after the lift

Specifications

Brand Pro Comp Suspension
Part number EXPK5098BX (title K5098BX)
Suspension type Lift kit
Lift 3 to 3.5 inches
Lift height range 0 to 3.5 inches
Tire size 33 inch
Wheel size 17 inch
Shocks PRO-VST front and rear, included
Coilovers PRO-VST 2.5-inch
Springs Rear coil springs
Fitment Direct fit

Vehicle fitment

The kit fits the 2003-2024 Toyota 4Runner and the 2007-2014 Toyota FJ Cruiser.

The 2010 and newer 4Runner models are covered in this list, but the FJ Cruiser is listed only through 2014. Models outside those years are not confirmed. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The kit is a bolt-in fit that needs no frame modifications. Changes in height and geometry mean the alignment should be checked, and driveline angles should be measured after the lift.

What’s included

The lift kit with front and rear PRO-VST shocks, 2.5-inch coilovers and rear coil springs.

SKU: EXPK5098BX Categories: ,

Fitment

VehicleYearsTrims
Toyota 4Runner2003–2024Limited, Nightshade, SR5, SR5 Premium, Sport, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Trail, Venture
Toyota FJ Cruiser2007–2014Base, TRD Special Edition, Trail Teams Special Edition

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which 4Runner years does the Pro Comp K5098BX fit?

Pro Comp lists 2003 to 2024 Toyota 4Runner models for this kit, which is a wider range than the K5097BX. Confirm your exact model year against the list before ordering.

Does the K5098BX fit a 2014 FJ Cruiser?

Yes. The FJ Cruiser fits 2007 to 2014 models, so a 2014 model is covered. The kit does not cover FJ Cruiser models from 2015 onward. The lift is 3 to 3.5 inches, with a range of 0 to 3.5 inches, and it is tuned for 33-inch tires on 17-inch wheels.

What tire size is this lift kit built for?

It is tuned for 33-inch tires on 17-inch wheels. The lift is 3 to 3.5 inches, with a lift height range of 0 to 3.5 inches.

Does this kit include shocks and springs?

Yes. It includes front and rear PRO-VST shocks, 2.5-inch PRO-VST coilovers and rear coil springs, so the kit comes with shocks and springs in one package.

What should be checked before choosing a lift for bigger tires?

Check the planned tire size, wheel width and offset, and measure clearance at the fenders with the suspension compressed. Confirm the lift height matches the tire clearance you need before ordering.

Do lift springs wear out over time?

Springs can sag or lose height with age and heavy loads, especially if the vehicle is often loaded. Check ride height periodically and inspect the springs for cracks or rust, and replace them if the lift changes noticeably.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota 4Runner Lift Kits on Amazon