Overview
The Pro Comp K2076M is a 6 inch short arm lift kit with PRO-M shocks for the 2009–2010 Dodge Ram 2500 and Ram 3500.
The Pro Comp K2076M lift kit has a lift height range of 6–7 inches and a rear lift of block and U-bolt, with PRO-M shocks front and rear. Raising the vehicle this way adds fender clearance for larger tires.
The kit is a direct fit for the listed Ram vehicles.
The kit includes PRO-M shocks and a rear block and U-bolt. Check the package contents against your installation before starting.
Key features
- 6 inch short arm lift kit
- Lift height range of 6–7 inches
- PRO-M shocks included front and rear
- Rear lift by block and U-bolt
- Direct-fit design
Short arm lift considerations
A short arm lift changes the upper control arm geometry, so the camber and caster settings move as the truck rises. Alignment is important after installation because these changes affect steering and tire wear. Many owners see faster inner tire wear when the alignment is not checked soon after the lift.
Ram trucks of this era carry substantial front axle weight, so the shocks and rear block see steady loads over time. Inspect the shock mounts and the rear block at each service, and look for leaks or cracking. Keeping a record of the installed parts makes later diagnosis much faster.
- Get an alignment soon after the lift
- Watch for uneven inner tire wear
- Inspect shock mounts for cracks at each service
- Re-check bolts after rough or trail use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2076M |
| Product type | Suspension lift kit |
| Lift kit | 6 inch, short arm |
| Lift height range | 6-7 inches |
| Shocks included | Yes |
| Shock series | PRO-M |
| Front shocks | PRO-M |
| Rear shocks | PRO-M |
| Rear lift method | Block/spacer |
| Rear lift component | Block and u-bolt |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Pro Comp K2076M lift kit covers these Dodge vehicles, with the trim levels shown:
- 2009–2010 Dodge Ram 2500 (Laramie, Power Wagon, SLT, ST, SXT, TRX)
- 2009–2010 Dodge Ram 3500 (Laramie, SLT, ST, SXT)
The list does not include the Ram 1500, or Ram 2500 and 3500 model years outside 2009–2010. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- A 6″ lift is a major suspension change, so leave installation to a qualified shop and work only with the vehicle on jack stands.
- Re-tighten the suspension hardware after the first drive and periodically afterward.
- Plan on an alignment and a check of driveline angles, brake lines and steering clearance after the lift.
- Taller vehicles may fall under local height limits, so check the rules where you drive.
- Check brake line length, driveline angles and steering stops after lifting the vehicle.
What’s included
- PRO-M front shocks
- PRO-M rear shocks
- Rear block and U-bolt
Not included: Check the hardware on hand against the installation steps before starting.













