Overview
It is a 6-inch stage 1 lift kit with PRO-X front and rear shocks for the 2011–2016 Ford F-350 Super Duty. The kit gives a 6 to 7 inch lift height range and includes the shocks.
The rear uses a block/spacer setup with block and U-bolt components and add-a-leaf hardware. Pro Comp’s description says its systems for the 2011 and newer F-350 keep suspension and steering geometry in place with laser cut brackets and a drop pitman arm, and that the rate coil springs raise the ride height and improve ride quality.
Key features
- Laser cut brackets
- Drop pitman arm
- Specific rate coil springs that raise ride height
- PRO-X front and rear shocks, included
- Block and U-bolt rear lift with add-a-leaf hardware
Block lift rear end checks
The rear block and U-bolt setup changes the angle between the axle and the driveshaft, which is one of the first things to check after a lift on a heavy-duty truck. A small angle change is normal, but a large one can cause vibration and early u-joint wear. Checking angles with the truck at ride height gives the clearest picture.
Coil springs and the block lift interact at the front and rear, so the suspension should be reviewed as one system. Look for uneven ride height, tires wearing on one edge, and clunking from loose hardware. A simple log of torque checks makes these patterns easier to spot early.
- Measure driveline angle at ride height
- Check U-bolt torque after initial driving
- Inspect add-a-leaf brackets regularly
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4181T |
| Suspension type | Lift kit, stage 1 |
| Lift height | 6 inches, listed range 6–7 inches |
| Front shocks | PRO-X |
| Rear shocks | PRO-X, included |
| Rear lift method | Block/spacer with block and U-bolt and add-a-leaf |
| Shocks included | Yes |
Vehicle fitment
It fits the 2011–2016 Ford F-350 Super Duty in the King Ranch, Lariat, Platinum, XL and XLT versions.
Models from 2017 onward fall outside this fitment, as do F-250 trucks. Check your truck’s year, model and trim against the fitment before ordering.
Installation notes
The coil springs raise the ride height, and the rear block lift changes the driveline angle, so check both after installation along with the steering alignment.
What’s included
PRO-X front and rear shocks, the block and U-bolt rear lift components with add-a-leaf hardware, the laser cut brackets, and the drop pitman arm.













