Overview
The Pro Comp K4182M is a 6-inch stage 2 lift kit for the 2011–2016 Ford F-350 Super Duty. It fits the King Ranch, Lariat, Platinum, XL and XLT versions.
The stage 2 setup uses replacement radius arms built from 4130 Chromoly tubing and 3/16-inch thick steel plate. It also includes laser cut brackets and a drop pitman arm, and the specific rate coil springs raise ride height while improving ride quality. It covers the 2011 and newer Super Duty F-350.
Key features
- Replacement radius arms of 4130 Chromoly tubing
- Radius arm plate of 3/16-inch thick steel
- Laser cut brackets
- Drop pitman arm
- Specific rate coil springs
Radius arm wear signs
Radius arms take the braking and acceleration loads that would otherwise push the axle around, so they wear at the bushings and mounting points over time. Early signs include a rear end that hops under light throttle, a clunk when shifting from reverse to drive, or a steering wheel that pulls on uneven pavement. Any of these deserves a look before the kit is pushed hard.
Regular inspection keeps small problems from turning into alignment or axle issues. Check the bushings for splits and play, look at the welds for hairline cracks, and make sure the bolts are torqued to specification after the first few weeks of driving.
- Clunks when shifting between reverse and drive
- Rear end hops under light throttle
- Uneven tire wear from changed axle position
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4182M |
| Suspension type | Lift kit, 6-inch stage 2 |
| Lift height | 6 inches |
| Radius arms | Replacement, 4130 Chromoly tubing and 3/16-inch steel plate |
| Brackets | Laser cut |
| Steering | Drop pitman arm |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2011–2016 Ford F-350 Super Duty in the King Ranch, Lariat, Platinum, XL and XLT versions.
Fitment ends with the 2016 model year and covers the F-350 Super Duty only. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Stage 2 radius arm kits change the axle location and the driveline angles, so have the driveline angles, the steering and the alignment checked after the lift is installed.
What’s included
Stage 2 radius arm kits change the axle location and the driveline angles, so check the driveline angles, the steering and the alignment after the lift is installed.













