Overview
The Pro Comp K5067T is a 6-inch lift kit with PRO-X shocks for the 2007–2009 Toyota FJ Cruiser. It is a direct fit for the Base, TRD Special Edition and Trail Teams Special Edition versions.
The kit lifts the FJ Cruiser’s suspension, and the PRO-X shocks are the one component named with it. Check the package contents against your installation before starting.
Lifting an FJ Cruiser
The FJ Cruiser is a body-on-frame vehicle with a solid rear axle, so a lift changes the way the shocks and axle geometry work together. Shocks sized for the new ride height keep the body settled over washboard roads and give better control when the suspension is working through its travel.
The FJ Cruiser is often used on rough trails, and the lift raises the center of gravity slightly, so tire choice and steering response both deserve attention. Check that the steering and brake lines have enough slack at full articulation, and confirm the driveline angles after the lift is installed. Older lift components should be inspected for wear before a trip.
- Check shock mounts and bushings for wear
- Inspect brake and steering lines at full articulation
- Recheck alignment after the first few drives
- Confirm driveline angles once the kit is in
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5067T |
| Suspension type | Lift kit |
| Lift height | 6 inches |
| Shocks | PRO-X |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007–2009 Toyota FJ Cruiser in the Base, TRD Special Edition and Trail Teams Special Edition versions.
It covers the 2007–2009 FJ Cruiser only. Compare the year, model and trim of your FJ Cruiser with this fit before buying.
Installation notes
Lifting the FJ Cruiser changes the driveline angles and front alignment, so have the alignment and driveline angles checked after installation.
What’s included
PRO-X shocks are part of the kit.























