Overview
The Pro Comp 6 Inch Lift Kit with Pro Runner Shocks, part number K1143BPS, is a 6-inch knuckle lift for the 2007-2013 Chevrolet Silverado 1500 and GMC Sierra 1500. The front shocks are Pro Runner SS units, unlike the reused factory front shocks on the K1143BP.
The front lift uses strut spacers and spindles, with front and rear crossmembers, compression struts and sway bar drop brackets. The rear uses a block, U-bolt and add-a-leaf kit. Brake line extension brackets are included, and the lift height range is 5 to 6.99 inches.
Key features
- 6-inch stage 1 knuckle lift
- Pro Runner SS front shocks
- Strut spacers and spindles
- Front and rear crossmembers
- Compression struts and sway bar drop brackets
- Bump stops
- Rear block, U-bolt and add-a-leaf kit
- Brake line extension brackets
Front shock upgrades and ride
Changing the front shocks on a knuckle lift affects how the front end controls body motion over bumps and during braking. Front shocks carry much of the steering and braking load, so the damping feel is noticeable right away. The shock must also fit the extended length and mounting points created by the lift.
Front shock changes are often considered alongside the rear. A front-only change can leave the rear damping mismatched, which affects how the truck settles over uneven ground. Matching the setup to how the truck is used keeps the ride predictable.
- Confirm the shock mounts clear the lift hardware
- Check the shock body for leaks after the first drives
- Inspect the rear shocks at the same time
- Re-check bump stop contact at full compression
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K1143BPS |
| UPC | 70000638096 |
| Lift height | 6 inches, stage 1 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Knuckle |
| Rear lift | Block, U-bolts and add-a-leaf |
| Front shocks | Pro Runner SS |
| Shocks included | Yes |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007-2013 Chevrolet Silverado 1500 (LS, LT, LTZ, WT and XFE) and the 2007-2013 GMC Sierra 1500 (Denali, SL, SLE, SLT, WT and XFE). Confirm fit for your vehicle’s year, model and trim before ordering.
The 2500 and 3500 series trucks, and 2006 and earlier or 2014 and later 1500 models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Knuckle and strut spacer lifts change front geometry, so have the alignment and driveline angles checked after installation.
What’s included
The kit includes strut spacers, spindles, front and rear crossmembers, compression struts, sway bar drop brackets, bump stops, brake line extension brackets, Pro Runner SS front shocks, and a rear block, U-bolt and add-a-leaf kit.









