Overview
The Pro Comp K5073BX is a 6-inch lift kit with PRO-VST front coilovers and PRO-VST rear shocks for the 2005–2011 Toyota Tacoma. The kit is a stage 1 suspension lift with a listed lift height range of 6 to 7 inches, and the shocks are included.
The rear uses a block and spacer method with U-bolts to raise the back of the truck. It is a direct fit for the 2005–2011 Toyota Tacoma.
Key features
- 6-inch stage 1 lift for the 2005–2011 Toyota Tacoma
- PRO-VST front coilovers and PRO-VST rear shocks
- Block and U-bolt rear lift
- Lift height range of 6 to 7 inches
Before you buy
Lift kits change how the suspension moves, so the shock choice matters as much as the lift height. Coilovers at the front carry the truck’s weight through the spring, while the rear shocks control the axle as the suspension compresses and rebounds. A well matched set keeps the ride controlled over washboard and when the bed is loaded with gear.
Before ordering, measure the tires you plan to run and check clearance at full steering lock and full suspension travel. Related parts often get replaced in the same job, including ball joints, tie rod ends and brake lines that may need extra length after a lift. Plan the installation so the truck can be aligned right after the work is finished. Keep notes of the measurements so the next alignment has a reference.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5073BX |
| Suspension type | Lift kit, stage 1 |
| Lift height | 6 inches, listed range 6–7 inches |
| Front shocks | PRO-VST coilovers |
| Rear shocks | PRO-VST, included |
| Rear lift method | Block and spacer with U-bolt |
| Shocks included | Yes |
Vehicle fitment
It fits the 2005–2011 Toyota Tacoma in the Base, Pre Runner and X-Runner configurations.
The kit covers 2005–2011 Tacoma models only. Check your truck’s model year and trim before buying.
Installation notes
A 6-inch lift changes the driveline angles and the front and rear alignment settings, so have the alignment and driveline angles checked after the kit is installed. Block lifts also change the rear driveline angle, so the driveline check matters more here than on a spacer-free kit.
What’s included
PRO-VST front coilovers, PRO-VST rear shocks, and the rear block and U-bolt lift hardware for this kit.













