Select your vehicle
-13%

Pro Comp 4″ Lift Kit with PRO-X Shocks – K2096T

Pro Comp Suspension

Shop Ram 2500 Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2013 to 2018 Ram 2500 pickups
  • 4-inch stage 1 lift with PRO-X front shocks
  • Coil spring rear, lift range of 4 to 5.5 inches
  • Shocks included

Description

Overview

The Pro Comp 4-inch Lift Kit with PRO-X Shocks, part number EXPK2096T (kit K2096T), is a stage 1 suspension lift for 2013 to 2018 Ram 2500 pickups. It fits the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT, ST and Tradesman versions.

It lifts the truck 4 inches at stage 1, with a range of 4 to 5.5 inches. The rear uses coil springs, with PRO-X shocks at the front and rear, and the shocks are included.

Confirm the tire size you plan to run against this lift range before choosing wheels and tires.

Tire clearance on a 2500

Tire clearance on a heavy-duty truck depends on the lift height, the tire width and how the truck is loaded. Under a heavy payload the rear sits lower, so the clearance measured on an empty truck may not hold when the bed is full.

Rubbing usually shows up first at the inner fender, the rear control arms or the brake lines during a turn. Test the fit by turning the wheels lock to lock and by driving over a rough surface, then adjust the setup before the tires wear unevenly.

Coil springs and shocks should be checked along with the tires. A rear that drops under load can change the tire contact patch, and worn shocks let the tires bounce more on uneven ground.

Specifications

Brand Pro Comp Suspension
Part number EXPK2096T
Kit code K2096T
Suspension type Lift kit, stage 1
Lift height 4 inches stage 1; range 4 to 5.5 inches
Rear lift method Coil springs
Rear lift component Coil spring
Shocks included Yes
Front shocks PRO-X
Rear shocks PRO-X
Fit type Direct fit

Vehicle fitment

It fits the 2013 to 2018 Ram 2500 in the trim packages named above.

The list does not include 2012 and earlier Ram 2500 models or the 2019 and newer models. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The coil spring rear setup changes the rear ride height. Measure front and rear heights after installation.

What’s included

The 4-inch stage 1 lift kit with PRO-X front and rear shocks, and the coil spring rear components.

SKU: EXPK2096T Categories: ,

Fitment

VehicleYearsTrims
Ram 25002013–2018Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT, ST, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Pro Comp EXPK2096T fit a 2013 Ram 2500 ST?

Yes. It fits 2013 to 2018 Ram 2500 pickups, including the ST versions, and 2013 falls within that range. Confirm the trim before ordering.

Are shocks included with the kit?

Yes. PRO-X shocks are listed at the front and the rear, and they are included. The specifications list PRO-X shocks at the front and the rear as included.

What tire size does the kit list?

No tire size is included with this kit. Confirm tire clearance for the 4 to 5.5 inch lift range before ordering.

Does a rear coil spring setup affect load capacity?

It can. Changing the rear spring setup changes how the truck sits and how it carries weight. Check the rear ride height after installation and keep an eye on the rear shocks, since they carry more of the work when the truck is loaded.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ram 2500 Lift Kits on Amazon