Overview
The Pro Comp K2096B is a 4-inch stage 2 suspension lift kit with front and rear ES9000 shocks. It uses coil springs and radius arms at the front and coil spring spacers at the rear, and it includes a drop track bar bracket.
Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- 4-inch stage 2 lift
- Front and rear ES9000 shocks in black
- Front coil springs with radius arms
- Rear coil spring spacers
- Drop track bar bracket included
Choosing a lift height
Lift height is the first decision with a kit like this, and it shapes everything that follows. A taller truck needs longer brake lines, revised steering geometry and often a different driveline angle. Measure the current height at each corner and decide whether your clearance and ride goals justify the change before buying. Radius arm designs hold the axle in place under acceleration, so their bushings carry more load than stock arms did.
Shock length and spring rate work together. Longer shocks can keep damping correct at the new height, while tired springs or worn bump stops can leave the front sagging. Heavier bumpers, winches and larger tires add weight the springs must carry, so plan those upgrades early rather than discovering the problem later.
- Inspect radius arm bushings at each oil change
- Recheck fasteners after the first trail outings
- Watch for uneven tire wear after alignment
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2096B |
| UPC | 70000689271 |
| Lift | 4 inches, stage 2 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Radius arm or radius arm brackets |
| Front shocks | ES9000 |
| Rear shocks | ES9000 |
| Rear lift method | Spacers |
| Finish | Black |
Vehicle fitment
Fit depends on your vehicle’s year, model and trim, so confirm it before you order.
Installation notes
A 4-inch radius arm kit changes the front alignment and rear driveline angles, so an alignment and driveline check is needed after installation. The drop track bar bracket is part of the kit, so the track bar setup should be checked once the front is raised.
What’s included
The kit includes front and rear ES9000 shocks, front coil springs with radius arms, rear coil spring spacers and a drop track bar bracket.












