Overview
The Pro Comp K2185B is a 6-inch radius arm drop kit with ES9000 shocks for the 2013 to 2018 Ram 3500 with the 6.7-liter diesel engines. The kit lifts the front with coil springs and radius arm drop brackets and lifts the rear with blocks and U-bolts. The lift range is 4 to 6 inches.
A radius arm drop moves the lower control arm mount down, so the front suspension keeps its geometry at a higher ride height. The kit also includes a pitman arm for steering correction, and Pro Comp describes its suspension kits as made to keep steering geometry in line.
Radius arm drops are a common way to add front ride height on heavy-duty pickups without replacing the whole front axle. The arm mounts move so the front suspension keeps its geometry at the higher ride height, while the coil springs carry the added height. Owners who carry heavy loads or tow often look at this style for the extra support it gives the front end.
Key features
- 6-inch lift for the 2013 to 2018 Ram 3500
- Front radius arm drop brackets with coil springs
- ES9000 shocks included at both ends
- Pitman arm for steering correction
- Sway bar links and bump stop extensions
- Brake line extension brackets
- Rear lift blocks with U-bolts
Radius arms under heavy loads
Radius arm drops keep the front suspension geometry closer to stock at a higher ride height, which matters on a truck that carries heavy loads or pulls a trailer. The arm mounts carry braking and drive forces, so the bushings, brackets and fasteners see more stress than they would at stock height. Keep the arms and mounts inspected through regular service.
Diesel trucks carry more weight at the front, so pay attention to the steering components and tires as part of the same work. Check the pitman arm, tie rod ends and sway bar links for play after the first drives. When the front is raised, the brake lines are under more strain, so look over the extensions for kinks and chafing.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2185B |
| UPC | 700008182631 |
| Type | Radius arm drop suspension kit |
| Lift height | 6 inches, listed range 4 to 6 inches |
| Front shocks | ES9000 |
| Rear lift | Block and U-bolt |
| Shocks | Included |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2013 to 2018 Ram 3500 in Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman trims.
Earlier Ram 3500 trucks and the Ram 2500 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front radius arm drops and the pitman arm change the steering and suspension angles, so an alignment is needed after installation. Heavy diesel trucks also need the driveline angles checked after a lift of this size.









