Overview
The Pro Comp 6 Inch Stage II Lift Kit with ES9000 Shocks, part number K2069B, is a 6-inch lift for the 2007-2008 Dodge Ram 2500 and 3500. It is a direct-fit kit with a lift height range of 5 to 6.99 inches and a coil spring front end.
The front uses coil springs with upper and lower control arms, and the suspension is a coil spring and short arm design. A pitman arm provides the steering correction. Front sway bar links and bump stop extensions come with the kit, along with brake line extension brackets. The rear uses a block and U-bolt kit, and ES9000 front shocks are included.
Key features
- 6-inch lift
- Coil springs with upper and lower control arms
- Pitman arm steering correction
- Front sway bar links
- Bump stop extensions
- Brake line extension brackets
- ES9000 front shocks, included
Pitman arm and alignment
A pitman arm steering correction works with the drag link and tie rods to keep the front wheels pointing straight after the lift. Because the steering connection changes, the system should be checked carefully before the truck returns to regular use.
Coil spring and short arm front ends rely on upper and lower control arms for position. Bushings in those arms wear over time and can introduce looseness that shows up as wandering on the highway. Regular greasing and inspection help keep the front end tight.
Choosing a complete kit with matching sway bar links and bump stop extensions helps the front end work as one system. Brake line extension brackets should be inspected whenever the front end is serviced.
- Check steering box and pitman arm for play
- Inspect control arm bushings at each service
- Verify brake line routing after install
- Keep an alignment record for the truck
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2069B |
| UPC | 614901122909 |
| Lift height | 6 inches |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Coil spring and short arm |
| Steering correction | Pitman arm |
| Rear lift | Block and U-bolt kit |
| Front shocks | ES9000 |
| Shocks included | Yes |
| Fitment | Direct fit |
Vehicle fitment
The kit fits the 2007-2008 Dodge Ram 2500 (Laramie, SLT, ST and SXT) and the 2007-2008 Dodge Ram 3500 (Laramie, SLT, ST, SXT and Sport). Ram 1500 trucks and Ram 2500 and 3500 model years outside 2007-2008 are not covered. Verify year, model and trim against your truck before ordering.
Ram 1500 trucks and Ram 2500 and 3500 model years outside 2007-2008 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The pitman arm correction and the control arm components change steering geometry, so have the steering and alignment checked after installation.
What’s included
The kit includes front coil springs, upper and lower control arm components, front sway bar links, bump stop extensions, a pitman arm steering correction, brake line extension brackets, a rear block and U-bolt kit, and ES9000 front shocks.









