Overview
The Pro Comp K2199T is a 6 inch Stage 2 radius arm lift kit with front and rear PRO-X shocks, part number K2199T. It fits the 2014–2018 Ram 2500 and is a complete suspension system rather than a set of separate components.
The kit is built with cast and CNC-machined knuckles and laser-cut, CNC-formed, robotically welded cross members. It includes brake line extensions, longer bump stops and sway bar drop brackets, which support steering geometry and suspension performance after the lift.
Pro Comp describes its suspension systems as built for performance and reliability over obstacles, with manufacturing that uses quality control measures at each step. The K2199T is the 6 inch Stage 2 version, and its PRO-X shocks are fitted at both the front and the rear.
Key features
- 6 inch lift height
- Stage 2 radius arm design
- Front and rear PRO-X shocks
- Cast and CNC-machined knuckles
- Laser-cut, CNC-formed and robotically welded cross members
- Brake line extensions
- Longer bump stops
- Sway bar drop brackets
Before installing a radius arm kit
A radius arm lift kit replaces the factory control arms that locate the axle, so the new arms set axle position and control how the suspension moves under load. Because the front and rear suspension work together on this type of build, a lift changes driveline angles, steering geometry and the way the axle travels through its range. Those changes show up as steering feel, tire wear and tracking on the highway, which is why the install is normally finished with a full alignment and a driveline check.
Shocks and bump stops are often replaced at the same time. Longer shocks control the extra suspension travel, and longer bump stops keep the axle from striking the frame at full compression. Brake lines also need attention, because they must reach the caliper from the new axle position without stretching or rubbing. Before installation, inspect bushings, ball joints and steering components, since worn parts can quickly throw off new geometry.
- Check brake line routing before the first drive
- Inspect bushings and ball joints for play
- Recheck fasteners after the first highway run
- Schedule an alignment and driveline angle check
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2199T |
| Lift height | 6 inch |
| Kit type | Stage 2 radius arm lift kit |
| Shocks | Front and rear PRO-X |
| Knuckles | Cast and CNC-machined |
| Cross members | Laser-cut, CNC-formed, robotically welded |
| Included details | Brake line extensions, longer bump stops, sway bar drop brackets |
Vehicle fitment
It fits the 2014–2018 Ram 2500.
The kit is sold for the 2014–2018 Ram 2500. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
A 6 inch radius arm kit changes steering and driveline geometry, so have the wheel alignment checked after installation and confirm the driveline angles. Check the brake line extensions for correct routing before driving.
What’s included
Cast and CNC-machined knuckles, cross members, front and rear PRO-X shocks, brake line extensions, longer bump stops and sway bar drop brackets.













