Overview
The Pro Comp K2186B is a 6-inch radius arm kit with ES9000 shocks for the 2013 to 2018 Ram 3500 with 5.7-liter engines. It is the gas-engine version of the K2185B. The front uses coil springs with radius arm drop brackets, and the rear uses blocks and U-bolts. The lift range is 4 to 6 inches.
The kit includes a pitman arm to correct steering geometry at the new ride height. Brake line extension brackets and bump stop extensions are included, along with front sway bar links.
Radius arm drop kits change where the lower control arms attach, which lowers the arm mounts and lets the front suspension sit higher while keeping its angles closer to stock. The 5.7-liter version uses the same design: coil springs carry the added height at the front, and the rear blocks and U-bolts set the rear ride height to match. The brake line extension brackets extend the brake lines to reach the new ride height, and the pitman arm is part of the steering correction.
Key features
- 6-inch lift for 2013 to 2018 Ram 3500 trucks
- Front radius arm drop brackets with coil springs
- ES9000 shocks at the front and rear
- Pitman arm for steering correction
- Brake line extension brackets
- Sway bar links and bump stop extensions
Radius arm geometry at the front
Radius arm drop kits move the lower control arm mounts, so the front suspension can sit higher while keeping its angles closer to stock. That makes the arm mounting points, the coil spring height and the steering linkage all part of one setup. Changes at one point show up at the others, which is why front work is best done as a complete system.
Driving feel changes too. The front will feel firmer or lighter depending on load, and the truck may track differently on crowned roads. Pay attention to any wander or pull, and keep tire pressures consistent side to side. Heavy towing with a lifted truck also puts more load on the front bushings and brake components, so check them on a regular schedule.
- Check bushings and mounts after the first trips
- Keep tire pressures even side to side
- Inspect brake lines and sensor wires
- Watch for wander or pull on crowned roads
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2186B |
| UPC | 700008182641 |
| Type | Radius arm suspension kit |
| Lift height | 6 inches, listed range 4 to 6 inches |
| Front shocks | ES9000 |
| Rear lift | Block and U-bolt |
| Engine | 5.7-liter |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2013 to 2018 Ram 3500 in Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman trims.
Diesel-engine versions are a separate part, the K2185B. Confirm your vehicle’s year, model, engine and trim before ordering.
Installation notes
Because the front geometry changes with the radius arm drop and pitman arm, have the alignment checked after installation. Check the driveline angles on a lifted 3500 as well.









