Overview
The Pro Comp 6 Inch Lift Kit with Pro Runner Shocks, part number K2081BP, is a 6-inch coil spring and short arm lift for the 2009-2010 and 2011-2013 Dodge Ram 2500 and 3500. It is a direct-fit kit with a lift height range of 5 to 6.99 inches, finished in black.
This version uses Pro Runner shocks at the front and rear in place of the ES9000 shocks in the K2081B. The front uses coil springs with control arms, and the kit includes a track bar, sway bar links, a pitman arm and U-bolts. The rear uses lift blocks and U-bolts. The kit requires 17-inch or larger wheels with a 4.625-inch backspace.
Key features
- 6-inch stage 1 lift
- Coil springs with control arms
- Track bar and sway bar links
- Pitman arm steering correction
- Rear lift blocks with U-bolts
- Pro Runner front and rear shocks, included
- Black finish
Pro Runner shock setup
Shocks control how quickly the suspension settles after a bump, and a lift changes their working angle, so the shock choice matters on a truck with a coil spring and short arm front end. Pro Runner shocks fitted at both ends give the kit one consistent setup from front to rear. Compare the mounting hardware and intended use against your truck before installing, especially if it tows or carries heavy loads.
Shocks are often replaced with the lift components because worn units lose damping and can wear new springs faster. Check for leaking fluid, bent mounts and cracked or missing bushings. On trucks that see mostly highway use, alignment may matter more than the shock choice, so have the steering geometry checked after installation.
- Check shock mounts and bushings at each oil change
- Look for fluid seepage down the shaft
- Replace worn shocks in pairs at the same axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2081BP |
| UPC | 70000637826 |
| Lift height | 6 inches, stage 1 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Coil spring and short arm |
| Rear lift | Lift blocks and U-bolts |
| Shocks | Pro Runner, front and rear |
| Wheel requirement | 17-inch or larger with 4.625-inch backspace |
| Finish | Black |
| Fitment | Direct fit |
Vehicle fitment
The kit fits the 2009-2010 Dodge Ram 2500 (Laramie, SLT, ST, SXT and TRX), the 2009 Dodge Ram 3500 (Laramie, SLT, ST and SXT), the 2011-2013 Ram 2500 and the 2011-2013 Ram 3500 across the trim levels shown.
Ram 1500 trucks and Ram 2500 and 3500 model years outside 2009-2013 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The track bar, pitman arm and control arm components change steering and suspension geometry, so have the alignment and steering checked after installation. Check the wheels against the backspace requirement before mounting them.
What’s included
The kit includes front coil springs, control arms, a track bar, sway bar links, a pitman arm, U-bolts, rear lift blocks, and Pro Runner front and rear shocks.









