Overview
The K4233T is a 6-inch suspension lift kit with PRO-X twin tube shocks for 2021-2026 Ford F-150 4WD trucks. It is designed for tires up to 35 inches and adds ground clearance for off-road use.
The kit uses upper strut spacers that keep the factory-tuned struts, so the ride stays close to stock, and rear lift blocks with U-bolts that maintain factory load capacity. Pro Comp describes its extended steering knuckles as keeping factory steering geometry, and it uses front lower crossmembers and a differential skid plate made from 3/16-inch steel plate.
The kit can be built up from daily work use to trail use. The optional Pro Series upper control arms can improve on-road ride quality and drivability.
Key features
- 6-inch lift with a listed range of 6 to 7 inches
- Upper strut spacers retain the factory-tuned struts
- Extended steering knuckles keep factory steering geometry
- Front lower crossmembers and differential skid plate of 3/16-inch plate steel
- Rear lift blocks and U-bolts maintain factory load capacity
- PRO-X shocks at the front and rear
- Designed for tires up to 35 inches
- Upgradeable with Pro Series upper control arms
Strut spacers and steering geometry
Upper strut spacers raise the front end while keeping the factory-tuned struts in use, so the stock damping character stays closer to the original. The spacers sit between the strut tower and the top of the strut, so seating and fastener torque matter for a quiet, secure install. Check the contact faces for debris before assembly.
Front and rear lifts should be balanced so the truck sits level. Rear blocks with U-bolts add height at the axle, so a level check after installation confirms both ends match. Larger tires add rolling load and change steering effort, so match the tire choice to the lift and check clearances at full lock.
- Check the strut spacer fasteners after the first drive
- Measure truck height at all four corners after installation
- Inspect steering linkage for clearance at full lock
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4233T |
| Suspension type | Lift kit |
| Lift height | 6 inches; listed range 6 to 7 inches |
| Maximum tire size | 35 inches |
| Front lift method | Upper strut spacers |
| Rear lift method | Block and U-bolt |
| Front shocks | PRO-X |
| Rear shocks | PRO-X |
| Shocks included | Yes |
Vehicle fitment
It fits 2021-2026 Ford F-150 trucks in the 4WD configuration, across the nine trims covered.
The fit covers 2021 and 2022 models only, so 2023 and newer trucks and 2015-2020 F-150s fall outside it. Make sure the year, model and trim match before ordering.
Installation notes
A 6-inch lift changes alignment and driveline angles, so have the alignment checked and the driveline angles inspected after installation. The front uses strut spacers and the rear uses blocks with U-bolts, so check that both ends sit level after installation.
What’s included
The base kit includes upper strut spacers, rear lift blocks, U-bolts and PRO-X shocks.
Not included: Pro Series upper control arms, an optional add-on that is not part of the base kit.

























