Select your vehicle

Pro Comp 6 Inch Lift Kit with Pro-Runner Shocks – K1171BPS

Pro Comp Suspension

Shop Chevrolet Silverado 1500 Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 6-inch lift with a front strut spacer and Pro Runner shocks at both ends
  • Fits 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500
  • Built for 2WD and 4WD gas-engine trucks
  • Part number K1171BPS

Description

Overview

The Pro Comp 6 Inch Lift Kit with Pro-Runner Shocks, part number K1171BPS, is a 6-inch shock and strut lift for the 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500. It fits 2WD and 4WD models with a gas engine and is a direct-fit kit.

The front uses a strut spacer with Pro Runner shocks, and the rear uses Pro Runner shocks as well. It is a shock upgrade rather than a full lift kit. The rear lift method is shackles. The lift height range is 5 to 6.99 inches. Check the package contents against your installation before starting.

GM 1500 trucks built before April 1, 2016 had cast steel or aluminum control arms, and trucks built on or after that date have stamped steel upper and lower control arms. This kit works with either design of control arm.

Key features

  • 6-inch stage 1 lift
  • Front strut spacer
  • Pro Runner front and rear shocks
  • 2WD and 4WD gas-engine models
  • Shock upgrade classification

Before you install a strut lift

A strut spacer raises the front of the truck by changing where the strut mounts sit, so the front springs and steering geometry shift along with the ride height. Shock-based lifts like this keep the factory springs, so the ride stays close to stock while the body sits higher. Changes in ride height can alter how the truck tracks on grooved pavement, so drive it gently at first and listen for new noises from the front end.

Pro Runner shocks at both ends are often serviced together with the strut hardware, so inspect the upper strut mounts and bushings while the truck is apart. Look for cracked rubber, leaking fluid or loose bolts. Retorque fasteners after the first few drives and check brake hose and wiring length, since the front end moves when the lift goes in.

  • Inspect strut mounts and bushings during installation
  • Re-check fastener torque after the first few drives
  • Check brake hose and wiring length at the front end
  • Re-check alignment after any suspension work

Specifications

Brand Pro Comp Suspension
Part number K1171BPS
UPC 70000779560
Lift height 6 inches, stage 1
Lift height range 5 to 6.99 inches
Suspension type Shock upgrade
Front Strut spacer
Front shocks Pro Runner
Rear shocks Pro Runner
Shocks included Yes
Fitment Direct fit

Vehicle fitment

It is a direct fit for the 2014-2018 Chevrolet Silverado 1500 (Custom, High Country, LS, LT, LTZ, SSV and WT) and the 2014-2018 GMC Sierra 1500 (Base, Denali, SLE and SLT).

Trucks from 2013 and earlier and the 2500 and 3500 series are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A strut spacer changes front geometry, so have the alignment checked after installation.

What’s included

The kit includes a front strut spacer, Pro Runner front shocks and Pro Runner rear shocks.

SKU: EXPK1171BPS Category:

Specification

Shipping weight 296.50 lbs
Package dimensions 48.00 × 48.00 × 48.00 in
brands

Fitment

VehicleYearsTrims
Chevrolet Silverado 15002014–2018Custom, High Country, LS, LT, LTZ, SSV, WT
GMC Sierra 15002014–2018Base, Denali, SLE, SLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the K1171BPS fit a 2016 Chevrolet Silverado 1500?

Yes. The 2014-2018 Silverado 1500 is covered, and 2016 falls within that range. The coverage includes the Custom, High Country, LS, LT, LTZ, SSV and WT versions.

Is the K1171BPS a full lift kit?

No. It is a shock upgrade with a front strut spacer and Pro Runner shocks at both ends, so it is not a full lift. Its rear lift uses shackles, so confirm the rear hardware in your package before installing.

Does the K1171BPS work with stamped steel control arms?

Yes. It is designed to work with either aluminum or stamped steel control arms on GM 1500 trucks, so both control arm designs are covered. Confirm fit for your vehicle's year, model and trim before ordering.

How do I know if the shocks need replacing on a lifted truck?

Look for fluid on the shock body, a bouncy ride after bumps, or uneven tire wear. Worn shocks can let the truck keep moving after it stops, which is a sign to inspect them. Check the mounts and bushings at the same time, since loose mounts can mimic shock wear.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Chevrolet Silverado 1500 Lift Kits on Amazon