Overview
The Pro Comp K5073BPX is a 6-inch Stage 2 lift kit with front MX2.75 coilovers and Pro Runner shocks for the 2005–2011 Toyota Tacoma. The front uses a drop crossmember, steering knuckles and coilovers, and the rear uses a block and U-bolt kit with add-a-leafs.
Differential drop brackets and sway bar drop brackets complete the front and axle hardware. The front shock is an MX2.75 coilover, and Pro Runner shocks are used at the rear.
Key features
- 6-inch lift height, Stage 2
- Drop crossmember
- Steering knuckles and MX2.75 front coilovers
- Differential drop brackets
- Sway bar drop brackets
- Block and U-bolt rear lift with add-a-leafs and Pro Runner rear shocks
Stage 2 upgrade considerations
A Stage 2 setup adds coilovers at the front, which changes both ride height adjustment and damping compared with a Stage 1 kit. Coilovers combine spring and damper, so setup is more about preload and damping than simply swapping shocks. Front geometry should be checked after the coilovers are installed.
Pro Runner rear shocks work with the block and U-bolt rear lift and add-a-leafs. Check that the rear shocks clear the axle and add-a-leaf hardware through full travel. Matching front and rear damping helps keep the truck balanced on rough roads.
The drop crossmember and steering knuckles also change alignment, so check the brake lines and driveline angles once the install is complete.
- Check front alignment after coilover setup
- Verify rear shock clearance through full travel
- Inspect brake lines for clearance
- Measure driveline angles after installation
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5073BPX |
| UPC | 70000637872 |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Lift kit stage | Stage 2 |
| Suspension type | Knuckle |
| Front control | Drop crossmember, steering knuckles and coilovers |
| Rear lift | Lift blocks, U-bolts and add-a-leafs |
| Front shocks | MX2.75 |
| Rear shocks | Pro Runner |
Vehicle fitment
Fitment covers the 2005–2011 Toyota Tacoma Base and Pre Runner versions.
Only the 2005 through 2011 Tacoma model years are included. The 2004 and earlier trucks and the 2012 and newer generation are outside the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Coilovers and the drop crossmember change the front suspension geometry, so have the alignment set and the brake lines and driveline angles checked after installation.
What’s included
The kit includes the drop crossmember, steering knuckles, MX2.75 front coilovers, differential drop brackets, sway bar drop brackets, the block and U-bolt rear lift with add-a-leafs, and Pro Runner rear shocks.









