Overview
The Pro Comp EXPK4182T, also written K4182T, is a 6-inch Stage II lift kit for the 2011–2016 Ford F-350 Super Duty. It is a direct fit, and the system centers on coil springs and replacement radius arms.
This F-350 kit is the sister part to the K4180T, so compare the two part numbers before ordering. The arms are built from 4130 chromoly tubing with 3/16-inch steel plate.
Key features
- Specific-rate coil springs for added ride height
- Laser-cut brackets
- Drop pitman arm for steering geometry
- Stage II radius arms built from 4130 chromoly tubing
- Direct fit to the listed 2011–2016 F-350 Super Duty
Radius arm care and checks
Radius arms take the axle’s fore-aft loads under acceleration and braking, so their bushings and mounting points deserve regular inspection. Look for cracks at the welds, loose bolts at the frame and axle ends, and any rubber that has split or flattened. Check these areas after rough trail use and at each oil change.
Because the arms, springs and brackets work as one system, a damaged arm can change the pinion angle and the alignment more than expected. If the truck pulls under braking or the steering feels loose, stop and check the arms before driving farther. Keep a record of the torque checks.
Radius arm setups also suit owners who regularly change wheel and tire sizes, since each change can shift clearance at the new height. Recheck clearance after any size change.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK4182T (K4182T) |
| Kit type | Lift kit, complete suspension system |
| Kit stage | Stage 2 |
| Radius arms | Replacement, 4130 chromoly tubing with 3/16-inch steel plate |
| Springs | Specific-rate coil springs |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits the 2011–2016 Ford F-350 Super Duty in the King Ranch, Lariat, Platinum, XL and XLT trims.
The F-250 Super Duty and trucks from 2017 onward are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Swapping the radius arms affects axle location and steering geometry, so plan for an alignment and a check of the pitman arm after the install.
What’s included
The system includes coil springs, radius arms, brackets and a drop pitman arm for this Stage II setup. Check the package contents against your installation before starting, including the shock arrangement.













