Overview
The Pro Comp 6 Inch Lift Kit with Pro Runner Shocks, part number K1144BPS, is a 6-inch knuckle lift for the 2007-2013 Chevrolet Silverado 1500 and GMC Sierra 1500. The front shocks are Pro Runner SS units, and the rear uses a block, U-bolt and add-a-leaf kit.
The front lift is built from strut spacers and spindles, with front and rear crossmembers, compression struts and sway bar drop brackets. Bump stops and brake line extension brackets are also included. The lift height range is 5 to 6.99 inches, and the fitment is direct.
Key features
- 6-inch stage 1 knuckle lift
- Pro Runner SS front shocks
- Strut spacers and spindles
- Front and rear crossmembers
- Compression struts and sway bar drop brackets
- Bump stops
- Rear block, U-bolt and add-a-leaf kit
Shock and spring pairing
Front shock choice changes how the lifted front end feels on rough ground. A shock with stiffer valving suits frequent off-road use, while softer units suit mostly paved driving. When a front shock is changed alongside a knuckle lift, the upper and lower mounts should be checked for fit, since the spacer changes the mounting position.
The rear block, U-bolt and add-a-leaf kit works with the rear springs to restore load support. Inspect the U-bolts for correct torque and check the add-a-leaf for seating after the first trip. Front spindles and crossmembers should be inspected for cracks after heavy use. Tire size can also influence how the steering and suspension react, so match wheel offset and tire diameter to the geometry before driving on rough ground.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K1144BPS |
| UPC | 70000638097 |
| Lift height | 6 inches, stage 1 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Knuckle |
| Rear lift | Block, U-bolts and add-a-leafs |
| Front shocks | Pro Runner SS |
| Shocks included | Yes |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007-2013 Chevrolet Silverado 1500 in the LS, LT, LTZ and WT versions and the 2007-2013 GMC Sierra 1500 in the SL, SLE, SLT and WT versions.
The 2014 and later 1500 models and the 2500 and 3500 series are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The strut spacer and knuckle front end changes alignment, so have the alignment and driveline angles checked after installation.
What’s included
The kit includes strut spacers, spindles, front and rear crossmembers, compression struts, sway bar drop brackets, bump stops, brake line extension brackets, Pro Runner SS front shocks, and a rear block, U-bolt and add-a-leaf kit.









