Overview
The Pro Comp 6 Inch Lift Kit with ES3000 Shocks, part number K2062B, is a 6-inch lift for the 2006-2008 Dodge Ram 1500. It is built around front spindles and knuckles, with front and rear crossmembers, compression struts and bump stop extensions. The rear lift uses lift blocks and U-bolts.
Steering correction is not needed. The kit includes extended-length brake lines.
Key features
- 6-inch lift height, with a 5 to 6.99 inch range listed
- Front spindles and knuckles
- Front and rear crossmembers
- Compression struts
- Front sway bar spacers and bump stop extensions
- Extended-length brake lines
- Steering correction not needed
Extended brake lines and front geometry
A 6-inch front lift with new spindles and knuckles changes brake hose routing, so the lines are a key part of the install. Extended brake lines reduce strain on the hoses at full droop, which is why they come with the kit. Brake hose length matters for both braking safety and steering lock.
Front driveshafts and CV joints operate at a different angle after a lift, so check their condition before installing. Compression struts take load off the lower control arms and affect ride feel. Regular inspection of the hoses, bump stops and strut mounts helps catch wear early.
- Check brake hoses for stretch after the install
- Inspect CV joints and driveshaft angles
- Recheck strut mount bolts after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2062B |
| UPC | 614901122763 |
| Lift height | 6 inches |
| Lift height range | 5 to 6.99 inches |
| Front lift | Spindles, knuckles and crossmembers |
| Rear lift | Lift blocks and U-bolts |
| Front shocks | The front shocks are the factory units reused with this kit. |
| Fitment | Direct fit |
Vehicle fitment
The kit is a direct fit for the 2006-2008 Dodge Ram 1500 across its trim levels.
Ram 2500 and 3500 trucks and other Ram 1500 years are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 6-inch lift that replaces front knuckles and adds compression struts changes steering and driveline geometry. Have the alignment and driveline angles checked after installation.
What’s included
The kit includes front spindles and knuckles, front and rear crossmembers, compression struts, front sway bar spacers, bump stop extensions and extended-length brake lines.









