Select your vehicle

Pro Comp 6 Inch Lift Kit with ES9000 Shocks – K5080B

Pro Comp Suspension

Shop Toyota Tacoma Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 6-inch Stage 1 kit for 2012–2015 Toyota Tacoma
  • Strut spacers and steering knuckles at the front with no steering correction required
  • Lift blocks with add-a-leaf and U-bolts at the rear
  • Crossmembers, differential drop brackets and sway bar drop brackets included

Description

Overview

The Pro Comp K5080B is a 6-inch Stage 1 knuckle-type lift kit with ES9000 shocks for the 2012–2015 Toyota Tacoma. Strut spacers and steering knuckles raise and locate the front, and the rear uses lift blocks with add-a-leafs and U-bolts.

No steering correction is needed for this kit. Crossmembers, differential drop brackets and sway bar drop brackets are included. The front shocks are re-used OEM units, and ES9000 shocks are named in the kit title, so confirm the shock package before ordering.

Key features

  • 6-inch lift height from a Stage 1 kit
  • Strut spacers
  • Steering knuckles
  • Crossmembers
  • Differential drop brackets and sway bar drop brackets
  • Lift blocks with add-a-leafs and U-bolts at the rear

Tacoma front geometry notes

Strut spacers and steering knuckles change the front geometry of a Tacoma, which affects caster, camber and toe. Because the knuckles locate the hub differently, brake lines, ABS wiring and CV angles should be checked for clearance. A lift of this type also changes the relationship between the front and rear of the truck, so the rear pinion angle is worth checking too.

Crossmembers and drop brackets are usually installed as a group with the front components, and they carry the load of the differential and sway bar. Check the bolts after the first few trips, listen for clicks or looseness in the front end, and inspect the strut mounts and bushings during regular service. Uneven tire wear across the front tires often signals that the alignment needs another look.

  • Check brake line and ABS wire clearance after installation
  • Inspect CV boots for stretching at full articulation
  • Recheck crossmember and drop bracket bolts early

Specifications

Brand Pro Comp Suspension
Part number K5080B
UPC 614901034332
Lift height 6 inch (lift height range 5 to 6.99 inches)
Lift kit stage Stage 1
Suspension type Knuckle
Front lift Strut spacers and steering knuckles
Steering correction None required
Rear lift Lift blocks with add-a-leaf and U-bolts
Front shocks Re-use OEM (the product name cites ES9000 shocks)

Vehicle fitment

The kit fits 2012–2015 Toyota Tacoma trucks in the Base, Pre Runner, TRD Pro and X-Runner versions.

The list covers the 2012 through 2015 model years only, so the 2011 Tacoma and the 2016 and newer trucks are not included. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Strut spacers and steering knuckles change the front geometry, so have the alignment checked and the driveline angles measured after the lift is installed.

What’s included

The kit includes strut spacers, steering knuckles, crossmembers, differential drop brackets, sway bar drop brackets, the rear lift blocks with add-a-leafs and U-bolts, and ES9000 shocks named in the product name.

SKU: EXPK5080B Category:

Specification

Shipping weight 201.80 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Fitment

VehicleYearsTrims
Toyota Tacoma2012–2015Base, Pre Runner, TRD Pro, X-Runner

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the K5080B fit a 2016 Tacoma?

No. The kit fits the 2012 through 2015 Toyota Tacoma, so a 2016 model falls outside its fit. Confirm your vehicle's year, model and trim before ordering.

Is steering correction needed on this kit?

The spec table says none is required for this kit, so no separate steering correction part is listed. No separate steering part is named in the kit contents either.

Which shocks does it use?

The front shocks are re-used OEM units, and ES9000 is named in the kit title for the shock package. Confirm the rear shock package and the front shock model before ordering, since the kit contents decide which shocks you receive.

Do sway bar drop brackets need regular inspection?

Yes. Sway bar drop brackets and end links should be inspected during regular service for cracks, bushing wear and loose fasteners. A worn link can clunk over bumps and reduce the sway bar's effect on body roll.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tacoma Lift Kits on Amazon