Overview
The Pro Comp K3114E is a 2-inch spacer system with shock extensions for the 2018 Jeep Wrangler JL, two-door and four-door. The kit adds steel coil spring spacers, bolt-on shock extensions and bump stop extensions. The lift range is 2 to 2.5 inches.
The shock extensions let the factory shock absorbers stay in place, and the spacers keep the factory coil springs from being over-compressed without losing suspension travel. The bump stop extensions maintain clearance for 35-inch and 37-inch tires on Rubicon models. Sway bar drops are included to keep the suspension’s operating angle, and the kit needs no drive line or exhaust modifications.
Key features
- Steel coil spring spacers with index pins and holes that locate the factory isolators
- Heavy-duty bolt-on shock extensions that keep the stock shocks
- Bump stop extensions for 35-inch and 37-inch tire clearance on Rubicon models
- Sway bar drops that help maintain the operating angle
- No drive line or exhaust modifications required
Ride height and clearance
Spacers raise the body without replacing the coil springs, which keeps the factory springs working within their normal range. Shock extensions let the stock shocks keep their damping while the suspension sits higher, so the shock stroke and mounting angle change slightly. Bump stop extensions matter most when the tires are larger, because they help the suspension reach its new limits without contacting the frame.
When choosing a spacer kit, consider how it works with tire size, gearing and the rest of the suspension. A taller stance can change steering angles and brake hose length, and many owners add a driveline check after lifting. Inspect the isolators and spring seats at each service. Look for cracked rubber, sagging springs and leaking shocks, and replace worn parts before adding more height.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K3114E |
| UPC | 700008513231 |
| Type | Suspension spacer system with shock extensions |
| Lift height | 2 to 2.5 inches |
| Lift method | Front coil spacers, rear spacers |
| Shocks | Stock shocks retained with extensions; shocks not included |
| Fitment | Direct fit |
Vehicle fitment
The kit fits the 2018 Jeep Wrangler JL, including Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims.
It is designed for the 2018 Wrangler JL. Match your vehicle’s year, model and trim to that application before buying, especially if it is a JK, a JT Gladiator or an earlier Wrangler generation.
Installation notes
The shock extensions bolt onto the stock shock absorbers, and the spacers sit on the factory isolators. Have the alignment checked after installation, since the ride height changes.
What’s included
Steel coil spacers, bolt-on shock extensions, bump stop extensions and sway bar drops. Not included: replacement shock absorbers, because the kit uses the stock shocks.












































