Overview
The Pro Comp EXPK2185T, also written K2185T, is a 6.0-inch radius arm lift kit with PRO-X shocks for the 2013–2018 Ram 3500. It is a direct fit for that truck, with block and U-bolt rear lift components.
Radius arms locate the axle front to back, and the arms are part of this lift. The kit adds longer bump stops and brake line extensions, which the axle needs at its new height. It is sold as a complete radius arm system, with the arms, knuckles and cross members set up together for the new height and steering geometry.
Key features
- 6.0-inch radius arm lift with a 6–7 inch lift height range
- Cast and CNC-machined knuckles, per Pro Comp’s description
- Laser-cut, CNC-formed and robotically welded cross members
- Brake line extensions, longer bump stops and sway bar drop brackets included
- PRO-X front and rear shocks, included
Radius arm lift inspection
Radius arm lifts shift the axle’s location, so the arm mounts, knuckles and cross members carry more load than a stock suspension. Check for cracked welds, bent brackets and loose hardware after the first trail trips, and look over the brake lines where they pass the axle for stretching or rubbing.
Bump stops and sway bar drop brackets also deserve a look because they handle travel the stock setup never reached. Confirm the axle does not hit the bump stops under normal driving, and check that the sway bar links move freely. The same checks apply when the truck is loaded for towing.
Owners who add accessories such as winches or heavier bumpers should recheck the arms and mounts, since added weight at the front changes the load path through the radius arms.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK2185T (K2185T) |
| Kit type | Radius arm lift kit |
| Kit stage | Stage 2 |
| Lift height | 6 inches, with a lift height range of 6–7 inches |
| Front shocks | PRO-X |
| Rear shocks | PRO-X |
| Rear lift method | Block and spacer |
| Rear lift component | Block and U-bolt |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits the 2013–2018 Ram 3500 in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman trims.
Only the 2013–2018 Ram 3500 is listed, so the 2500, 2019 and newer Ram trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Radius arm kits change the axle’s fore-aft location and the pinion angle, so the driveline and alignment need to be checked after the lift is in.
What’s included
The kit includes the radius arm components, PRO-X shocks, brake line extensions, longer bump stops and sway bar drop brackets. Check the package contents against your installation before starting.













