Overview
The Pro Comp K4143BPX is a 6-inch lift kit with front MX2.75 coilovers and Pro Runner shocks for the 2009–2013 Ford F-150. It pairs front crossmembers and steering knuckles with impact struts, and it uses a rear block and U-bolt kit for the back of the truck.
The front shock is the MX2.75 coilover. No steering correction is required, and brake line extension brackets are included to reach the raised front brake components.
Key features
- 6-inch lift height
- Front MX2.75 coilovers
- Front crossmembers and steering knuckles
- Impact struts and a rear crossmember
- Front sway bar spacers
- Brake line extension brackets and rear block and U-bolt kit
Coilover setup
Coilovers at the front change how the lift settles, so spring height and damper setting need to match the rest of the truck. Adjustment is best done after the crossmembers and steering knuckles are installed and the alignment is checked. A coilover set too high or too low can change steering feel.
The rear block and U-bolt kit and the front impact struts share the job of carrying the truck at its new height, so check them after the first drives. Brake hoses and sway bar spacers should also be looked over for clearance once the coilovers are at their final setting.
- Re-check coilover height after the alignment
- Inspect coilover mounts and bushings for wear
- Look for seepage at damper seals
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4143BPX |
| UPC | 70000637848 |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Lift kit stage | Stage 1 |
| Suspension type | Knuckle |
| Front control | Crossmembers, steering knuckles and impact struts |
| Front shocks | MX2.75 coilover |
| Steering correction | None required |
| Rear lift | Block and U-bolt kit |
Vehicle fitment
It fits the 2009–2013 Ford F-150 in the FX4, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, XL and XLT versions.
Only the 2009 through 2013 model years are on the list. The 2008 and 2014 trucks are not covered by this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Coilover-equipped front ends need the spring height and damper adjustment checked during the alignment, and the brake hoses should be inspected for clearance once the lift is in place.
What’s included
The kit includes front MX2.75 coilovers, front crossmembers, steering knuckles, impact struts, front sway bar spacers, a rear crossmember, brake line extension brackets, and the rear block and U-bolt kit.









