Overview
The Pro Comp K5056B is a 4-inch Stage 1 lift kit with ES3000 front and rear shocks for the 1986–1995 Toyota 4Runner and Toyota Pickup. It lifts the front with steering knuckle spacers and front and rear crossmembers, and it lifts the rear with a block and U-bolt kit.
Upper control arm mount brackets are part of this Stage 1 package, along with bump stop extensions and front sway bar links. The front shock is ES3000.
Key features
- 4-inch lift height, Stage 1
- Steering knuckle spacers
- Front and rear crossmembers
- Front sway bar links
- Bump stop extensions
- Upper control arm mount brackets
Before you buy
A Stage 1 lift is often chosen for a modest change in height with a focus on everyday driving. The front spacers and crossmembers do most of the lifting, and the rear block and U-bolt kit raises the back to match. Because the front geometry changes, the tire size, bumper weight and steering components all deserve a look before the install starts.
Older trucks often show worn bushings, brake lines and bump stops once they are lifted. Inspect those parts while the wheels are off, and replace anything that feels soft or cracked. A clean, documented install makes later service easier, and it helps the next owner understand what was changed.
- Check brake line length after the lift
- Inspect bushings and bump stops during install
- Recheck alignment after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5056B |
| UPC | 614901207224 |
| Lift height | 4 inch (lift height range 3 to 4.99 inches) |
| Lift kit stage | Stage 1 |
| Suspension type | Spacer |
| Front lift | Steering knuckle spacers |
| Rear lift | Lift blocks and U-bolts |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
Vehicle fitment
It fits the 1986–1995 Toyota 4Runner in the DLX and SR5 versions, and the 1986–1995 Toyota Pickup in the Base, Base Turbo, DLX, SR5 and SR5 Turbo versions.
Only the 1986 through 1995 model years are included, so the 1985 and earlier 4Runner and Pickup, and the later generations, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The knuckle spacers and A-arm mount brackets alter the front suspension geometry, so schedule the alignment and check the driveline angles once the lift is installed.
What’s included
The kit includes steering knuckle spacers, front and rear crossmembers, front sway bar links, bump stop extensions, upper control arm mount brackets, the rear block and U-bolt kit, and ES3000 front and rear shocks.









