Overview
The Pro Comp 75 Series Trilogy Race Beadlock Wheel, 17 x 9 inches with a 5 on 5 bolt pattern, is an aluminum beadlock wheel in satin black (part number 5175-797347). It has an eight-spoke design and is built for air-down use, where the bead ring holds the tire on the wheel at low pressure.
The diamond knurl and the figure eight Infini-Grip pattern work together to keep the bead locked regardless of air pressure or impacts. The Trilogy Race wheel is engineered to be 27 percent stronger than the previous version. The bead ring is double the thickness of the original and is forged from 6061 aluminum. The wheel has been used in the Baja 1000 and King of the Hammers.
Key features
- Eight-spoke design with a satin black finish
- Bead ring forged from 6061 aluminum, double the thickness of the original design
- Grade 8 bolts, fully countersunk to protect them from rocks and impacts
- NORDLOCK washers on the ring hardware
- 45-degree diamond knurl on the ring
- Infini-Grip figure eight pattern on the bead area
- Available in satin black or super machined finishes
Trail use and tire seating
The bead ring on this type of wheel holds the tire where it sits, so the tire stays on the rim as pressure drops. Good seating depends on a clean bead area and a properly mounted tire. Dirt, sand or corrosion on the bead seat can keep the bead from sealing, so clean it before mounting.
Tires fitted to beadlocks should be matched to the rim width, since the sidewall shape changes with the fit. Trail damage to the ring or bolts is easy to miss, so check the hardware after the first run and periodically after rough use. Inspect the knurl on the ring for flattened or chipped areas.
- Clean the bead seat before mounting
- Check ring hardware after each trail session
- Look for flattened knurl or chips on the ring
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 5175-797347 |
| Series | 75 Series Trilogy Race, beadlock |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 83 |
| Offset | -6 |
| Backspacing | 4.75 |
| Construction | Aluminum |
| Finish | Satin black |
Vehicle fitment
This is a universal fit wheel. Check that the offset, backspacing, bolt pattern and center bore suit your vehicle before mounting.
Confirm your vehicle’s year, model and trim before ordering, and confirm the tire size and load rating for beadlock use.
Installation notes
The fully countersunk Grade 8 bolts are protected from rocks, impacts and abuse. Check that the offset and backspacing suit your vehicle. The ring hardware uses NORDLOCK washers, which help keep the ring properly torqued. Check the bolt torque with a torque wrench after mounting.
What’s included
The package is one wheel. Plan to source tires, valve stems and other hardware separately.











