Overview
The Pro Comp PXA5164-213647 is a 20×10 aluminum eight-spoke wheel from the Pro Comp 64 Series Gunner, in satin black milled with a 6 on 135 bolt pattern. It is sold as one wheel with a center bore of 87.
The Gunner is a chiseled eight-spoke design with CNC-milled windows and a 3650-pound eight rating. The 10-inch width and -18 offset with 4.75 backspacing place the tire outboard of the mounting face, which affects fender and caliper clearance.
Key features
- Chiseled eight-spoke design
- CNC-milled windows
- 20-inch diameter, 10-inch width
- 6 on 135 bolt pattern with a center bore of 87
- Offset -18 and backspacing 4.75
- Two-year finish warranty
Six-lug hub care
A six-lug hub carries the load through six studs, and each one needs to seat evenly against the wheel. Before mounting, clean the hub face and the back of the wheel so rust, paint or grit does not hold the wheel off its seat. A loose wheel can wear the bolt holes and the hub face, so check the seating after the first drive.
Rotate the wheel and tire on a regular schedule, and watch for uneven tire wear that may point to wheel offset or alignment problems. When a six-lug hub shows pitting or a worn pilot, the wheel may not center correctly. Address hub wear before fitting a new wheel.
- Clean the hub face before mounting
- Tighten lug nuts in a star pattern
- Recheck torque after the first drive
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5164-213647 |
| Series | 64 Series Gunner |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 6 on 135 |
| Center bore | 87 |
| Offset | -18 |
| Backspacing | 4.75 |
| Load rating | 3650 lbs (eight rating) |
| Finish warranty | Two years |
Vehicle fitment
No vehicle is named for this wheel. The universal fit label does not identify a truck or Jeep. A six-lug hub at 135 with an 87 center bore is required, and the -18 offset should be checked at the fender and caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Six lug holes at 135 must line up with the hub, so a 6 on 5.5 hub will not accept this wheel. Confirm the bolt pattern and center bore on the vehicle, then test-fit the 10-inch rim with the tire. Six lug holes on a 135 spacing must match the hub exactly, and the 87 center bore has to seat on the hub pilot. The 10-inch width and -18 offset set the tire position, so measure inner clearance with the tire mounted. Confirm the bolt pattern before ordering, because a 6 on 5.5 hub will not accept a 6 on 135 wheel.
What’s included
One 20×10 aluminum wheel. Hardware needs depend on the six-lug hub, so inventory what your vehicle already has first.











