Overview
The Pro Comp 45 Series Proxy 17×9 wheel, part number PXA5045-7982, is a 17-inch aluminum wheel that is 9 inches wide. It is the eight-lug version of the Proxy, with an 8 on 6.5 bolt pattern, a Holes style and a satin black finish.
The wheel has a 108 center bore, a -6 offset and a 4.75 backspacing. It is low-pressure cast and rated at 2500 to 3650 lbs per wheel. It is offered as universal fit, with no vehicle named.
Key features
- Low-pressure cast aluminum
- 17-inch diameter, 9-inch width
- 8 on 6.5 bolt pattern
- Center bore 108
- Offset -6 with backspacing 4.75
- Holed style with satin black finish
Eight-lug hub considerations
Eight-lug wheels are used on heavier trucks and some larger SUVs, where hub size and bolt circle are set by the vehicle’s design. An 8 on 6.5 pattern has its own bolt circle, so adapters and hub-centric rings cannot turn it into a five-lug fit. Match the hub exactly, then check that the lug nuts seat cleanly in the wheel holes.
Eight-lug setups tend to carry more weight, so brake, bearing and tie-rod wear can show up sooner under heavy loads. Inspect those parts when the wheel goes on, and recheck lug nut torque after the first drive.
After the first few miles, recheck the torque on every stud and look at the hub face for any sign of fretting or rust. Fretting shows as a fine, dusty pattern and usually means the mounting surfaces need cleaning before the wheel goes back on.
- Measure the bolt circle before ordering
- Use the lug nut style the wheel holes require
- Inspect wheel studs for damage or thread wear
- Check fender clearance at full compression
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5045-7982 |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 108 |
| Offset | -6 |
| Backspacing | 4.75 |
| Load rating | 2500 to 3650 lbs per wheel |
| Style | Holes |
| Finish | Satin black |
| Construction | Aluminum |
| Series | 45 Series Proxy |
Vehicle fitment
No vehicle is named for this eight-lug Proxy. Confirm the 8 on 6.5 hub and 108 center bore before ordering, then check the -6 offset against the fender and brake caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An 8 on 6.5 layout is not interchangeable with five- or six-lug hubs. Measure the hub before mounting, and check fender clearance with the wheel installed.
An 8 on 6.5 pattern is an eight-lug layout with its own bolt circle, so it cannot be matched with five- or six-lug hubs. The 108 center bore must seat on the hub, and the -6 offset and 4.75 backspacing set the position of the wheel face. Measure the caliper and fender clearance once the wheel is mounted.
What’s included
Make sure the package has everything your installation needs.









