Overview
The Pro Comp PXA5173-7982 is a 17×9 aluminum spoke wheel from the Pro Comp 73 Series Trilogy line, in satin black milled with an 8 on 6.5 bolt pattern. It is sold as one wheel with a center bore of 125 and an offset of -6.
This 9-inch-wide wheel has a backspacing of 4.75, and the brand describes its high offset design as aimed at brake clearance on performance trucks.
Key features
- Low-pressure cast aluminum construction
- Spoke face style
- 17-inch diameter, 9-inch width
- 8 on 6.5 bolt pattern
- Center bore of 125
- Offset -6 with 4.75 backspacing
Choosing a wheel for clearance
Offset and backspacing decide where the tire sits relative to the fender, the brake caliper and the steering parts. A lower offset moves the tire outward, which can help clearance at the caliper but can bring the tire closer to the fender at full lock. Compare the mounting face of the new wheel with your current one before buying so you know which way the tire will shift.
Tire width and wheel spacers change the same relationship, so treat them as part of the wheel choice. Many owners replace wheel bearings, hub seals and lug studs at the same time they fit new rims, since the old hardware has already carried the same loads. Check the lug nut seats and torque them again after the first few drives.
- Compare the mounting face to your current wheel
- Measure caliper clearance with the tire mounted
- Retorque lug nuts after the first few drives
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5173-7982 |
| Series | 73 Series Trilogy |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 125 |
| Offset | -6 |
| Backspacing | 4.75 |
Vehicle fitment
This is a universal fit wheel with no specific vehicle attached. An 8 on 6.5 hub with a 125 center bore is the first check, followed by the -6 offset against the fender and caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the hub for an 8 on 6.5 layout before buying, since the pattern has to match exactly. A test fit with the tire mounted shows whether the rim clears the caliper at full lock. Eight lug holes on a 6.5 spacing must line up exactly with the hub, so measure the vehicle before ordering. The 125 center bore has to seat on the hub pilot for the wheel to center. The 9-inch width needs a tire sized to that rim, and the -6 offset sets where the tire sits relative to the fender and brake caliper. Test-fit with the tire mounted and check clearance at full steering lock. Because the 4.75 backspacing sets the inner lip position, measure the room behind the mounting face on the vehicle as well. Recheck the fit after any change in tire size, wheel spacers or suspension height.
What’s included
One 17×9 aluminum wheel in satin black milled. Compare the package contents with your installation list before starting.











