Overview
The Pro Comp 40 Series Vertigo 18×9 wheel, part number PXA2640-898350, is an 18-inch aluminum split spoke wheel with a 9-inch width. Its bolt pattern is 6 on 5.5 and its finish is matte graphite in gray.
The Vertigo is made with low-pressure casting. This version has a 108 center bore, a 0 offset and a 5 backspacing. It is universal fit and has no specific vehicle tied to it, so compare the hub and clearance figures with your own vehicle.
Key features
- Low-pressure cast aluminum
- 18-inch diameter, 9-inch width
- 6 on 5.5 bolt pattern
- Center bore 108
- Offset 0 and backspacing 5
- Matte graphite split spoke styling
Things to check
Before mounting, compare the hub, bolt pattern and center bore against the wheel. A 0 offset wheel sits centered in the mounting area, which keeps the outer face and inner clearance balanced. Tire choice matters too; a wider tire adds weight and changes the way the sidewall meets the fender at full steering lock.
Look at the brake caliper and the suspension arms before finalizing the wheel. Small contact points often show up only after a full turn or a bump, so test the fit at both lock positions. Lug nut seats should match the wheel style, and the wheel should spin freely after it is tightened. Keep the mounting surface clean before the wheel goes on.
- Check caliper clearance at full lock
- Confirm the hub is clean and free of rust
- Match lug nut seat type to the wheel
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA2640-898350 |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | 0 |
| Backspacing | 5 |
| Style | Split spoke |
| Finish | Gray, matte graphite |
| Construction | Aluminum |
| Series | 40 Series Vertigo |
Vehicle fitment
This wheel has no vehicle list and is universal fit. Measure your hub’s bolt pattern and center bore, then confirm that the 18-inch size clears your calipers before mounting a tire.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 108 center bore must suit the hub so the wheel centers correctly. Test-fit the wheel and confirm brake clearance before the first drive.
With a 0 offset and 5 backspacing, the wheel face sits at the center of its width. That makes it a useful reference against the -6 and -12 offset wheels in the same line when you compare clearance for your vehicle.
What’s included
The product is one 18×9 wheel in gray matte graphite. Confirm the lug nuts and center caps you need for your installation before starting.









