Overview
The Pro Comp PXA5162-218547 is a 20×10 aluminum split-spoke wheel from the 62 Series Apex line, in satin black milled with a 5 on 5.5 bolt pattern. It is sold as one wheel.
Built with low-pressure casting, this Apex wheel is rated in the 2500 to 3650 lbs per wheel range of the Pro Comp alloy line. Its offset of -18 and backspacing of 4.75 push the rim outward, which gives the inner components more room.
Key features
- Low-pressure cast aluminum
- Split-spoke design
- 20-inch diameter and 10-inch width
- 5 on 5.5 bolt pattern
- Center bore of 108
- Offset -18 with 4.75 backspacing
Wheel offset and tire choice
Offset sets where the mounting face sits relative to the centerline of the wheel. A negative offset moves the wheel outward, so the tire sits farther from the hub and can add clearance on the inner side. The same change can narrow room at the outer fender, so check both sides.
Wider rims with negative offsets change steering geometry slightly, and tire scrub can increase. Choose tire width and sidewall height with the rim in mind, and test-fit the setup at full steering lock. Spacers change offset but add stress to studs and bearings, so they need their own clearance check.
- Check outer fender clearance at full travel
- Recheck alignment after changing tires
- Confirm lug stud length before adding spacers
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5162-218547 |
| Series | 62 Series Apex |
| Style | Split spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 108 |
| Offset | -18 |
| Backspacing | 4.75 |
| Load rating | 2500 to 3650 lbs per wheel (Pro Comp alloy range) |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications means the wheel is not limited to one model. A 5 on 5.5 hub with a 108 center bore is the first match, and the -18 offset requires a check for fender and steering clearance.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 10-inch-wide rim at -18 offset changes where the tire sits, so a test fit with the chosen tire is needed to confirm clearance at the fender and suspension. Use only a 5 on 5.5 hub with a matching center bore.
What’s included
One 20×10 aluminum wheel with a satin black milled finish.











