Overview
The Pro Comp PXA1069-7965 is a 17×9 polished aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style face and a 5 on 4.5 bolt pattern. It is sold as one wheel with a center bore of 125 and an offset of -6.
Pro Comp says its Vintage alloys use low-pressure casting technology and combine head-turning style with light weight and a durable finish. This 9-inch-wide wheel has a backspacing of 4.75, and the brand describes its high offset construction as designed for brake clearance on performance trucks and sport utility vehicles.
Key features
- Low-pressure cast aluminum construction
- Holes style face
- 17-inch diameter, 9-inch width
- 5 on 4.5 bolt pattern
- Center bore of 125
- Offset -6 with 4.75 backspacing
Choosing a hub match
Wheel fitment starts with the hub. A bolt pattern of 5 on 4.5 and a 125 center bore decide whether the wheel can be bolted on squarely and centered. Before anything else, measure across the lug holes and compare the pilot diameter to the bore. A wheel that is off by a small amount can cause vibration and stress on studs, so a mismatch should stop the install rather than be forced.
Offset and backspacing come next. The -6 offset places the mounting face toward the outside of the rim, which affects how close the tire sits to the fender, suspension and brake caliper. Polished rims show scratches and brake dust more readily than painted finishes, so rinse brake dust off with mild soap and water, and inspect the lip for bends or cracks after any curb strike. Replace lug nuts and studs as a set if threads look stretched or worn.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA1069-7965 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Polished |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 125 |
| Offset | -6 |
| Backspacing | 4.75 |
Vehicle fitment
This wheel is not tied to a specific truck or Jeep model. Check the 5 on 4.5 pattern and 125 center bore against the hub first, then the -6 offset at the caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use a five-lug hub measuring 4.5 across the bolt holes. Test-fit the polished 9-inch rim with the tire mounted to confirm it clears the brake parts and any steering components.
What’s included
One 17×9 polished aluminum wheel.











