Overview
The Pro Comp K4070B is a 4-inch stage 2 coil spring lift for the 1981–1989 Ford Bronco. The front uses coil springs with radius arms, and the rear is raised with add-a-leafs. The lift height range is 3 to 4.99 inches.
ES3000 shocks are supplied at both ends, along with bump stop extensions, a pitman arm and extended length brake lines. The shock boots are not included.
Key features
- 4-inch lift, stage 2
- Front coil springs with radius arms
- Rear add-a-leaf lift
- Bump stop extensions
- Pitman arm steering correction
- Extended length brake lines
Stage 2 setup and alignment
Radius arms take over the front axle location from the stock control arm setup, so they carry braking and acceleration loads through their mounts. When a stage 2 kit is installed, the mounting points, bushings and frame brackets should be inspected for movement before the truck is driven on rough terrain. Check the tie rod ends and pitman arm as well, since a raised front end puts more angle on the steering components.
Add-a-leaf rear lifts often need the rear shocks and driveline checked together, because the rear axle position changes with the new leaves. Bump stop extensions limit how far the suspension can compress, so they are worth inspecting for cracks after rough off-road use. Replace worn shock mounts and check the boots or seals on the ES3000 shocks periodically, and re-torque all hardware after the first few trips.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4070B |
| UPC | 614901125153 |
| Lift | 4 inches, stage 2 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Radius arm |
| Front lift | Coil springs with radius arms |
| Rear lift | Add-a-leafs |
| Steering correction | Pitman arm |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
| Shock boots | Not included |
Vehicle fitment
It fits 1981–1989 Ford Bronco models. Confirm year, model and trim against your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Radius arms change the front axle location, so the alignment should be set once the kit is in. Check the rear driveline angles after the add-a-leafs are fitted, since the rear lift changes them.
What’s included
The kit includes front coil springs, radius arms, bump stop extensions, a pitman arm, extended length brake lines, rear add-a-leafs and ES3000 front and rear shocks. Shock boots are not included.









