Overview
The Pro Comp K3069 is a 2.5-inch stage 1 leaf spring lift with ES3000 shocks, designed for the 1972–1975 Jeep CJ5 Base and Renegade trims. The front uses leaf springs and the rear uses springs with U-bolts.
The shocks are ES3000 at both ends, and the shock boots are sold separately. The part is marked as a rear position kit. The maximum tire size is 32×11.50, and the wheels should be 15 inches or larger with a width of 8 to 12 inches.
Key features
- 2.5-inch stage 1 lift
- Front leaf springs
- Rear springs and U-bolts
- ES3000 front and rear shocks
- Shock boots sold separately
- Backspace range 3.25 to 4.5 inches
Before you buy
Shock boots are an easy part to forget on a CJ5 build. Since the ES3000 shocks run exposed in the rear position, grit and water reach the piston rods quickly on dirt roads. Plan for boots or sleeves before the truck is driven hard, and choose a set sized for the shock length you measure after the springs are seated.
A 2.5-inch stage 1 kit works best when the rest of the truck keeps pace. Check the transfer case linkage, the steering box mounts and the brake hoses, since a change in ride height moves each of them. Original CJ bump stops and shackles are often worn after decades, and replacing them in the same job saves a second lift.
For tires, a 32×11.50 size is the largest this kit handles, so measure your wheels’ backspace before mounting anything.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K3069 |
| UPC | 614901123241 |
| Lift | 2.5 inches, stage 1 |
| Suspension type | Leaf spring |
| Front lift | Leaf springs |
| Rear lift | Springs and U-bolts |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
| Shock boots | Sold separately |
| Position | Rear |
| Max tire size | 32×11.50 |
| Wheel size range | 15 inches or larger |
| Wheel width range | 8 to 12 inches |
| Min-max backspace | 3.25 to 4.5 inches |
Vehicle fitment
It fits 1972–1975 Jeep CJ5 Base and Renegade models. Later CJ generations and the Wrangler are outside its fit range.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Leaf spring lifts change the rear axle pinion angle, so check the driveline angles and the U-bolt tightness once the truck has been driven. Plan the shock boots before installation because they are sold separately.
What’s included
The kit includes front leaf springs, rear springs and U-bolts, and ES3000 front and rear shocks. Shock boots are sold separately.









