Overview
The Pro Comp K3102BP is a 3.5-inch stage 1 coil spring lift with front and rear Pro Runner shocks. It fits 2007–2018 Jeep Wrangler (JK) models in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
This is the Pro Runner shock version of the 3.5-inch ES9000 kit, K3102B. Coil springs are used at the front and the rear, and the shocks come in the box. The lift height range is 3 to 4.99 inches, which places this lift at the lower end of the 3.5-inch class.
Key features
- 3.5-inch lift, stage 1
- Front and rear coil springs
- Front and rear Pro Runner shocks
- Shocks included with the kit
- Direct fit to the listed JK trims
Choosing a lift height
A 3.5-inch coil spring lift sits at a height that many owners use for larger tires without a full suspension rebuild. Before buying, think about the tire diameter you plan to run, the clearance under the axles and how much steering or driveline work you are prepared to add. Taller tires raise gearing and load on the drivetrain, so a lift is easier to live with when the tire size matches what the springs and shocks were designed around.
Coil spring lifts also change the geometry the rest of the suspension relies on. Sway bar links, brake lines and driveshaft angles are often checked or replaced during a lift, and shocks set at a new length should be inspected for wear before a long trip. Shocks built for sustained damping are often chosen for rough trail use, since they keep control over uneven ground.
- Tire diameter and clearance under the axles
- Sway bar links and brake line length
- Driveshaft angles after the new height
- Shock wear before long trips
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K3102BP |
| UPC | 70000705633 |
| Lift | 3.5 inches, stage 1 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Coil spring kit |
| Rear lift | Coil springs |
| Front shocks | Pro Runner |
| Rear shocks | Pro Runner |
| Shocks included | Yes |
Vehicle fitment
The kit fits 2007–2018 Jeep Wrangler (JK) models in the trims named above. Other Wrangler generations are not covered by this kit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 3.5-inch coil spring lift changes the front alignment and the driveline angles. Set the alignment and check the driveline once the kit is installed, then re-check the ride height on each corner.
What’s included
The kit includes front and rear coil springs and front and rear Pro Runner shocks.












