Overview
The Pro Comp 4-inch Lift Kit with PRO-X Shocks, part number EXPK5054T (kit K5054T), is a stage 1 suspension lift for 1986 to 1995 Toyota 4Runner and Toyota Pickup models. It fits the 4Runner in the DLX and SR5 versions and the Pickup in the Base, Base Turbo, DLX, SR5 and SR5 Turbo versions.
The kit is listed at 4 inches of stage 1 lift, with a lift height range of 4 to 5.5 inches. At the rear, a block or spacer setup with a block and U-bolt component does the lifting. PRO-X shocks are listed at the front and the rear, and they are included.
Key features
- 4-inch stage 1 suspension lift
- PRO-X shocks at the front and rear, included
- Block and U-bolt rear lift
- Lift height range of 4 to 5.5 inches
Choosing a lift height
A lift kit raises the body above the axles, which gives tires more room and changes how the truck sits at both ends. A taller stance also moves the center of gravity higher, so body roll in corners and wind sensitivity on the highway may increase. Off the road, the extra height helps with ground clearance on uneven trails, but the gain is only useful when the tires, gearing and driveline match the new height.
When choosing a setup, think about the height you actually need, the tire diameter you plan to run, and whether the rest of the suspension will keep up. Rear blocks change pinion angle, so the driveshaft is a common concern after installation. Brake lines, sway bar links and steering components are often checked or replaced during the same job.
- Recheck brake line length after the lift
- Inspect U-bolts and block bolts after the first drives
- Look for driveshaft vibration at highway speed
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK5054T |
| Kit code | K5054T |
| Suspension type | Lift kit, stage 1 |
| Lift height | 4 inches stage 1; range 4 to 5.5 inches |
| Rear lift method | Block or spacer |
| Rear lift component | Block and U-bolt |
| Shocks included | Yes |
| Front shocks | PRO-X |
| Rear shocks | PRO-X |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1986 to 1995 Toyota 4Runner in the DLX and SR5 versions, and the 1986 to 1995 Toyota Pickup in the Base, Base Turbo, DLX, SR5 and SR5 Turbo versions.
The list does not include 1985 and earlier models or 1996 and newer 4Runner and Pickup models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear block and U-bolt setup changes the rear ride height, so measure both ends after installation and have the alignment checked.
What’s included
A 4-inch stage 1 lift kit, including PRO-X shocks at the front and rear.













