Overview
The Pro Comp K5080BPX is a 6-inch lift kit with front MX2.75 coilovers and Pro Runner rear shocks for the 2012–2015 Toyota Tacoma. It is a knuckle-type front lift with a block-type rear lift.
This is a Stage 1 kit, so confirm the stage before ordering. The rear uses blocks with Pro Runner shocks, and no steering correction is part of the kit.
Key features
- 6-inch lift height
- Front MX2.75 coilovers
- Pro Runner rear shocks
- Knuckle-type front suspension
- Block-type rear lift
- Lift height range of 5 to 6.99 inches
Coilover front, block rear
Coilovers combine the spring and damper into one unit, which changes how the front is tuned compared with separate coils and shocks. Spring rate and damping work together, so the coilover setting should match the truck’s typical load. Check brake lines and sensor wires for clearance once the front is fitted.
A block-type rear lift raises the axle while the leaf springs stay in place, so the rear ride can feel firmer on rough pavement. Pro Runner rear shocks are paired with the blocks here. Recheck the rear U-bolts after the first drives and confirm the driveline angle has not become too steep.
- Set alignment after coilover installation
- Check brake line length at full extension
- Inspect coilover mounts for cracks
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5080BPX |
| UPC | 700007161431 |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Lift kit stage | Stage 1 in the spec table (Stage II in the short description) |
| Suspension type | Knuckle |
| Rear lift | Block |
| Front shocks | MX2.75 coilovers |
| Rear shocks | Pro Runner |
Vehicle fitment
Trims covered are Base, Pre Runner, TRD Pro and X-Runner for the 2012–2015 Toyota Tacoma.
Only the 2012 through 2015 model years are on the list, so the 2011 and 2016 and newer Tacomas are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Coilovers on the front change the spring and damper setup, so set the alignment after the coilovers are installed and check the brake lines for clearance.
What’s included
The kit includes the front MX2.75 coilovers, the knuckle-type front components, the block-type rear lift, and Pro Runner rear shocks, as named in the product name and spec table.









