Overview
The Pro Comp Nitro 2.5 inch leveling lift kit with rear blocks, part 62206K, raises the front by 2.5 inches and the rear with lift blocks and U-bolts. It is Pro Comp’s economical alternative to a complete suspension system, and it is built to give room for larger aftermarket wheels and tires without a full suspension lift.
The front lift uses strut spacers and torsion keys to raise the coil springs, which keeps the factory steering geometry in place. This helps keep ride quality and handling close to factory. The rear lift uses coil spring spacers or lift blocks, depending on the vehicle’s design.
The kit fits the Ford F-150 from 2005 to 2021, with strut spacers used for the front lift. It is black, with aluminum spacers in metal construction.
Key features
- 2.5 inch front lift height
- Strut spacers and torsion keys for the front
- Lift blocks and U-bolts for the rear
- Factory steering geometry kept in place
- Aluminum spacer material
- Black finish
Rear lift and axle checks
Rear lift blocks and U-bolts change the position of the axle under the springs, which affects the pinion angle and the length of brake lines and the parking brake cable. Before installing, check the U-bolts for the axle diameter and confirm that the lift blocks sit flat on the spring seats. Uneven lift front and rear can also alter how the truck tracks, so measure the ride height on both ends.
Front-end components deserve a look too. Strut spacers and torsion keys alter how the coil springs seat, so inspect the mounts, bushings and steering linkage for wear after installation. Keep an eye on the rear U-bolts after the first trail runs, since they can loosen under load. A lift kit is easier to maintain when fasteners are checked at regular intervals.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 62206K |
| Front lift height | 2.5 inch |
| Front lift method | Strut spacers |
| Rear lift method | Lift blocks and U-bolts |
| Track bar drop | Not included |
| Shock relocation bracket | Not applicable |
| Bump stops | None |
| Spacer material | Aluminum |
| Type | Metal |
| Finish color | Black |
| Position | Front |
Vehicle fitment
It fits the 2005 to 2021 Ford F-150 in the trims covered, including the Raptor and the XL, XLT and Lariat.
Model years 2004 and 2022 and later are not in the list, and other Ford models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front lift uses torsion keys and strut spacers, so the front alignment must be checked after installation. The rear lift blocks use U-bolts, so check the U-bolt fit against your rear axle before you start.
What’s included
Front strut spacers and torsion keys, plus rear lift blocks and U-bolts, as a complete leveling kit.
Not included: A track bar drop, which the kit does not include.




















