Overview
The Power Stop AR8642XPR is a front slotted and cross-drilled brake rotor for 1999–2013 three-quarter-ton Chevrolet and GMC trucks and SUVs, including the Silverado 2500, Sierra 2500, Suburban 2500, Yukon XL 2500 and Hummer H2. The AR8642XPR is made for the front axle, uses cross-drilled holes together with slots, and arrives coated.
A G3000 grade casting and silver zinc plating give this rotor its rust protection, and the drilled and slotted face looks good behind factory or custom wheels.
For 1999-2013 Silverado/Sierra 2500, Suburban 2500, Hummer H2, the AR8642XPR replaces the original front rotor with a drilled and slotted version that Power Stop says keeps a clear contact patch between pad and rotor.
Key features
- Rounded slots clear water, gas and dust
- Cross-drilled holes for cooling
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Heavy-duty front rotor fit
Three-quarter-ton trucks and SUVs often tow heavier loads, which raises the heat a front rotor must shed on long grades. Cooling features such as cross-drilled holes help move heat away from the friction face, but they work best with pads matched to heavy use. Choosing a pad with stable friction at high temperature supports the whole setup.
Fitment on heavy-duty trucks is tied closely to hub pattern, rotor hat height and caliper size, so compare the old rotor with the new one before ordering. Check the hub face for rust and make sure the rotor sits flat against it. After installation, bed in the pads gently and recheck wheel torque after the first short drive.
- Confirm the old rotor’s hat and hub dimensions
- Replace pads at the same time as rotors
- Clean the hub face and wheel studs
- Inspect caliper slides for free movement
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8642XPR |
| UPC | 792088553621 |
| Type | Slotted and cross drilled |
| Position | Front |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The holes keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits 2002–2006 Chevrolet Avalanche 2500 (Base, LS, LT); 2001–2003, 2005–2006 Chevrolet Silverado 1500 HD (Base, LS, LT); 2007 Chevrolet Silverado 1500 HD Classic (LT); 1999–2004 Chevrolet Silverado 2500 (Base, LS, LT, WT); 2000–2013 Chevrolet Suburban 2500 (Base, LS, LT, LTZ); 2001–2003, 2005–2006 GMC Sierra 1500 HD (SLE, SLT); 2007 GMC Sierra 1500 HD Classic (SLE, SLT); 1999–2004 GMC Sierra 2500 (Base, SL, SLE, SLT, WT); 2000–2013 GMC Yukon XL 2500 (SLE, SLT); and 2003–2009 Hummer H2 (Base).
The AR8642XPR is a front rotor, and the Silverado and Sierra 2500 entries stop at 2004 for the non-HD trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the AR8642XPR is slotted and cross drilled, new brake pads and clean hub faces help the rotor seat and wear evenly on the front axle.









