Overview
The JBR1309 is an OE style replacement brake rotor for the 2016–2017 Toyota Land Cruiser and the 2007–2017 Toyota Sequoia and Tundra. It is a direct fit and is mill balanced, with a quiet, low-dust design.
The castings include extractor and set screw holes where required. The rotor is suited to non-aggressive driving.
A brake rotor is the disc that the brake pads clamp against to slow the wheel. Drilled and slotted versions change the face of that disc to move heat and debris away from the pad.
Key features
- OE style replacement rotor
- Smooth surface finish for less pad break-in time
- Detailed castings with extractor and set screw holes where required
- Mill balanced
- Intended for non-aggressive driving
- Quiet operation with low dust and long pad life
- It is designed to resist warping or cracking.
Choosing a replacement rotor
A smooth-faced replacement rotor suits everyday driving, where the goal is quiet stopping and fewer pad deposits. Smooth faces tend to bed pads in quickly, and they are easy to clean, which fits owners who use their trucks for commuting and light work. Compare the mounting face and hat design with the old rotor to confirm the match.
Rotors are usually replaced in pairs across an axle so braking stays even from side to side. Check the caliper slide pins and pad condition while the wheel is off, because worn hardware can cause the new rotor to wear unevenly or pull under braking. Quiet rotors still wear, so inspect the face at each service.
- Clean the hub face before fitting
- Check the old rotor for a lip and uneven thickness
- Bed in new pads with moderate stops
- Replace pads when they reach the minimum thickness
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR1309 |
| UPC | 792088578160 |
| Product type | OE style replacement brake rotor |
| Fit type | Direct fit |
| Surface finish | Smooth |
| Balance | Mill balanced |
Vehicle fitment
It is a direct fit for the 2016–2017 Toyota Land Cruiser (Base); the 2007–2017 Toyota Sequoia (Limited, Platinum, SR5); and the 2007–2017 Toyota Tundra (1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro).
Measure the rotor you are replacing for diameter, thickness, bolt pattern and weight, and compare those figures before ordering.
The Land Cruiser fits 2016–2017 only, and the Sequoia and Tundra fit 2007–2017. The 2018 models are not covered by this part number. Check your model year and trim against the vehicle before ordering.
Installation notes
Rotors are normally replaced in pairs across an axle, so plan for both sides when fitting the JBR1309.
What’s included
The JBR1309 is a single brake rotor and includes no other parts.
Not included: Pads and mounting hardware do not come with the rotor.









