Overview
The Power Stop Evolution JBR975XPR (part number PSTJBR975XPR) is a pair of front drilled and slotted brake rotors for the 2003–2009 Toyota 4Runner and Lexus GX470.
The rotors are vented cast iron with 6 lugs, with precision drilled holes for cooling and rounded slots that wipe away gas and debris. Power Stop machines and mill-balances each rotor.
The 4Runner and the GX470 share this front rotor. Power Stop gives the JBR975XPR the same drilled and slotted face and plating as the rest of its Evolution rotors, with the cooling and gas-clearing features on the disc surface.
Run-out is the side-to-side wobble of a spinning rotor, while DTV is the difference in thickness across the disc. Power Stop publishes both limits for this rotor, 0.0032 in and 0.0005 in respectively.
Key features
- Precision drilled holes allow rotor cooling
- Rounded slots keep a clear contact patch for smooth braking
- Silver zinc dichromate plating helps prevent rust and corrosion
- Mill-balanced; maximum run-out 0.0032 in (0.08 mm)
- Maximum DTV tolerance 0.0005 in (0.0125 mm)
- Vented cast iron, 6 lugs
Front brake maintenance
Front rotors on 4Runner and GX470 models do most of the stopping, so they warm up quickly on long descents. Drilled holes help heat leave the disc, and rounded slots keep the friction surface clean of gas and debris. The benefit depends on matched pads and a clean hub face.
Replace both front rotors at the same time as the pads, and clean the hub face and wheel studs before mounting. Check the caliper slide pins while the wheels are off, because a sticking caliper can wear a new rotor unevenly on one side.
- Tighten lug nuts in a star pattern
- Bed in new pads with moderate stops before highway driving
- Check brake fluid for moisture on a regular schedule
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTJBR975XPR |
| Product type | Front brake rotors, drilled and slotted |
| Disc material | Cast iron |
| Disc design | Vented |
| Position | Front |
| Number of lugs | 6 |
| Coating | Coated (silver zinc dichromate) |
| Maximum run-out | 0.0032 in (0.08 mm) |
| Maximum DTV tolerance | 0.0005 in (0.0125 mm) |
| Quantity | 2-wheel set |
| Fit | Direct fit |
Vehicle fitment
It fits the 2003–2009 Lexus GX470 in Base and the 2003–2009 Toyota 4Runner in Limited, SR5 and Sport versions. Every model year from 2003 to 2009 is covered by this single part number. The 2010 and later 4Runner and GX460 take a different rotor and are not covered here. Confirm the year, model and trim against your vehicle before ordering.
The 2010 and later 4Runner and GX460 take a different rotor and are not covered here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replace both front rotors together with new pads, and bed the pads in with a few moderate stops before normal driving.
What’s included
Two front rotors, supplied together.
Not included: Brake pads and mounting hardware.









