Overview
The Power Stop AR8644XPR is a rear slotted and cross-drilled brake rotor for 1999–2013 heavy-duty Chevrolet and GMC trucks, including the Silverado and Sierra 2500, 2500 HD, 3500 and 3500 HD, plus the Suburban 2500 and Yukon XL 2500. The AR8644XPR is made for the rear axle, uses cross-drilled holes together with slots, and arrives coated.
Mill balancing and Tru-Cast precision machining are part of how Power Stop builds its Evolution rotors, which use drilled holes for cooling and slots to clear gas and dust.
The rotor gives the rear brakes a rounded slot pattern, beveled drill holes and a G3000 grade casting, all machined to tight run out and DTV limits.
Key features
- Cross-drilled holes for cooling
- Rounded slots clear water, gas and dust
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Rear brake setup tips
Rear rotors share the job with the parking brake on many trucks, so the hardware behind the rotor matters as much as the rotor itself. Check the parking brake shoes or caliper, the hub bearing play and the caliper bracket before fitting a new rotor. Clean any rust from the hub and remove old corrosion so the rotor sits flat and does not wobble when tightened.
Slotted and cross-drilled rotors shed dust and gas differently than plain rotors, so the pads may look dirtier after a few weeks even when braking is normal. Choose pads designed for drilled and slotted rotors to avoid early chatter or noise. Use a standard bedding procedure after installation, and watch for pulsing or grinding that could point to a seating problem.
- Inspect parking brake hardware with the rotor
- Remove rust from the hub face before mounting
- Use pads matched to drilled and slotted rotors
- Look for dust buildup around the rear caliper
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8644XPR |
| UPC | 792088553645 |
| Type | Slotted and cross drilled |
| Position | Rear |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The drilled holes are designed to keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits 2003–2006 Chevrolet Avalanche 2500 (Base, LS, LT); 1999–2004 Chevrolet Silverado 2500 (Base, LS, LT, WT); 2001–2010 Chevrolet Silverado 2500 HD (Base, LS, LT, LTZ, WT); 2007 Chevrolet Silverado 2500 HD Classic (LS, LT, WT); 2004–2006 Chevrolet Silverado 3500 (Base, LS, LT, WT); 2007 Chevrolet Silverado 3500 Classic (LS, LT, WT); 2008–2010 Chevrolet Silverado 3500 HD (LT, LTZ, WT); 2000–2006 and 2008–2013 Chevrolet Suburban 2500 (Base, LS, LT); 1999–2004 GMC Sierra 2500 (Base, SL, SLE, SLT, WT); 2001–2010 GMC Sierra 2500 HD (Base, SL, SLE, SLT, WT); 2007 GMC Sierra 2500 HD Classic (SL, SLE, SLT, WT); 2004–2006 GMC Sierra 3500 (Base, SL, SLE, SLT, WT); 2007 GMC Sierra 3500 Classic (SL, SLE, SLT, WT); 2007–2010 GMC Sierra 3500 HD (SLE, SLT, WT); 2000–2006 and 2008–2013 GMC Yukon XL 2500 (SLE, SLT). Fifteen vehicle entries are covered, with model years from 1999 to 2013.
The AR8644XPR goes on the rear axle only, and the 1500-class trucks are not on its list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replace rear rotors in left and right pairs, and bed in new pads using the standard break-in procedure.









