Overview
The Power Stop AR8380XPR is a rear slotted and cross-drilled brake rotor for the 2009–2013 Dodge Journey.
The cross-drilled holes help keep the rotor up to 180°F cooler, and the rounded slots clear gas, water and dust from the contact area between pad and rotor.
Key features
- Cross-drilled holes, which Power Stop says keep rotors up to 180°F cooler
- Rounded slots sweep water, gas and dust from the contact patch between pad and rotor
- Precision machined with Tru-Cast technology
- Runout within 0.0015 and DTV tolerance within 0.005
- Mill balanced Evolution rotor
- Silver zinc plating helps resist rust in normal operation
- G3000 grade cast construction
- Reduces fade under hard braking
- It looks right behind custom or factory wheels.
Pairing rotors with pads
A rear rotor works with the pads to slow the wheel, and the surface it works on matters as much as the pad. Pad choice should match the rotor and the way the vehicle is driven. Slots and cross-drilled holes change how the pad face meets the rotor, so the pad needs to seat properly before the braking feels consistent. After installing new rotors, bed in the pads with several moderate stops to transfer an even layer of friction material.
Hub and rotor surfaces need to be clean and flat at install. Wipe the hub face, check that the rotor sits flush, and torque the lug nuts in a star pattern. Check the wheel bearings and caliper slide pins if the pulsing returns, since those can feel like rotor problems under the pedal. Rotors that are replaced in pairs keep braking even from side to side.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8380XPR |
| UPC | 792088917355 |
| Product line | Power Stop Evolution |
| Position | Rear |
| Rotor type | Slotted and cross drilled |
| Material | G3000 grade cast |
| Finish | Silver zinc plated |
| Runout | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
| Coating | Coated |
| Cooling holes | Beveled, precision-drilled cross holes; Power Stop says they keep rotors up to 180°F cooler |
| Slots | Rounded slots that sweep a clear contact patch between pad and rotor |
| Manufacturing | Tru-Cast technology, precision machined |
| Fade | The rotor is designed to reduce fade under hard braking. |
| Appearance | Its appearance suits both custom and factory wheels. |
| Plating note | All drilled and slotted rotors except hub and rotor assemblies are silver zinc plated |
| Fit | Direct fit |
Vehicle fitment
It fits the rear position on the 2009–2013 Dodge Journey in the AVP, Base, Crew, Express, Lux, Mainstreet, R/T, SE and SXT trims.
Listed vehicles:
- 2009–2013 Dodge Journey (AVP, Base, Crew, Express, Lux, Mainstreet, R/T, SE, SXT)
Journey model years after 2013 and every other Dodge model are outside this list. Confirm your vehicle’s year, model and trim before ordering.









