Overview
The JBR791 is an OE vented front brake rotor for the 1995–2004 Toyota 4Runner and the 1995–2004 Toyota Tacoma. It is an uncoated, direct-fit replacement intended for quiet, low-dust braking.
Vented rotors have vanes between the two friction faces that move air through the disc. This rotor is a plain OE style replacement, so it suits everyday driving rather than hard use.
Heat management is the main reason for drilled and slotted designs: braking turns motion into heat, and the rotor has to shed it.
Key features
- OE vented front replacement rotor
- Smooth surface finish for less pad break-in time
- Detailed castings with extractor and set screw holes where required
- Mill balanced
- Intended for non-aggressive driving
- Quiet operation with low dust and long pad life
- Designed to resist warping or cracking.
Smooth rotors and bedding in
Plain, uncoated cast rotors rely on the pad to create the friction layer, so the first stops after fitting matter. Smooth faces take a little longer to pick up a transfer layer, which is why gentle stops during the first stretch of driving are worth the time.
Because the rotor has no protective coating, surface rust can appear on the faces and hat area after the vehicle sits, especially in wet climates. A light surface film is normal and clears with braking. Check the friction faces for deep grooves, blue heat marks or a pulse in the pedal, and replace the rotors in pairs when any appear. Vented rotors also run hotter than solid discs under repeated stops, so avoid dragging the brakes down long grades.
- Bed in new pads gently before heavy braking
- Keep the hub mounting face clean and free of rust
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR791 |
| UPC | 792088136695 |
| Product type | OE vented replacement brake rotor |
| Position | Front |
| Coating | Not coated |
| Fit type | Direct fit |
| Surface finish | Smooth |
| Balance | Mill balanced |
Vehicle fitment
It fits the 1995–2004 Toyota 4Runner in Base, Limited, SR5 and Sport trims, and the 1995–2004 Toyota Tacoma in Base, Limited, Pre Runner, S-Runner and SR5 trims.
Measure the rotor diameter, thickness, bolt pattern and weight against the old rotor before installing.
Years from 2005 onward and other Toyota trucks and SUVs are not covered. Verify your year, model and trim before ordering.
Installation notes
Fit new pads with the rotors and bed them in using the standard procedure, since smooth rotors need the pads to seat properly before full braking.
What’s included
The JBR791 is a brake rotor and comes with no extra parts.
Not included: Pads, calipers and fasteners are not included.









