Overview
The Power Stop Evolution AR8753XPR is a set of slotted and cross-drilled rear brake rotors for the 2000-2002 Dodge Ram 2500 and 3500. The rotors are vented cast iron with eight lugs and are coated.
Power Stop describes these as specialty rotors that combine two technologies for performance: slots that degas the brake pads, and cross-drilled holes that aid cooling.
The set is sold as a 2 wheel set for the rear axle.
Key features
- Slotted for degassing the brake pads
- Cross-drilled to aid cooling
- Vented cast iron, 8 lugs
- Rear position, 2 wheel set
- Coated rotors
Rear brakes on heavy Rams
The Ram 2500 and 3500 are work trucks, and their rear brakes carry more load when hauling or towing. Slotted and cross-drilled rear rotors support that work by keeping the friction face clear and helping heat move away from the disc, though they still need a matched pad and clean hub surfaces.
Rear rotors on these trucks are usually replaced as a pair with pads at the same time. Clean the hub face, check the caliper slide pins and inspect the parking brake hardware, since a seized caliper can make a new rotor wear unevenly on one side.
- Torque the lug nuts evenly in a star pattern
- Bed in new pads with moderate stops
- Check brake fluid moisture if the truck tows often
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTAR8753XPR |
| Part type | Evolution drilled and slotted brake rotors |
| Disc material | Cast iron |
| Style | Vented |
| Position | Rear |
| Number of lugs | 8 |
| Quantity | 2 wheel set |
| Coating | Coated |
| Type | Slotted and cross-drilled |
Vehicle fitment
It fits the 2000-2002 Dodge Ram 2500 and the 2000-2002 Dodge Ram 3500. Ram 2500 and 3500 trucks from 2003 on are not covered. Verify the year, model and trim match your truck before ordering.
Ram 2500 and 3500 trucks from 2003 on are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two rear rotors for the eight-lug rear axle of the Ram.









