Overview
The Power Stop EBR698XPR is a front slotted and cross-drilled brake rotor for the 1999 and 2003–2004 Land Rover Discovery, 1999–2002 Discovery Series II and 2001–2002 Range Rover. The slotted face is meant to reduce fade, and the drilled pattern also looks good behind factory or custom wheels.
This rotor is meant for owners of the models below who want a front rotor with a slotted and cross-drilled face. Confirm the year and trim before buying.
Rotors and pads wear together, so many owners replace both at the same time rather than mixing new pads with worn rotors.
Key features
- Slotted and cross-drilled front rotor
- Direct fit for the listed vehicles
- Tru-Cast precision machining
- Designed to reduce brake fade
- Beveled, precision-drilled holes to help hold temperatures down in extreme braking
- G3000 grade cast
- Slots keep a clear contact patch between pad and rotor
- Rotor run-out within 0.0015 and DTV tolerance within 0.005
- Coated rotor
Front rotor and pad pairing
A rotor and pad set works as one friction system, so the pad compound and rotor face should be chosen together. Slotted rotors can wear pads quickly if the compound is too hard, and a soft compound can glaze if the rotor overheats. Matching the pad to the driving style, including off-road and towing use, helps keep braking consistent.
Front rotors on older Land Rover models often corrode around the hub, and rust on the mounting face can cause runout that shows up as pedal pulsation. Clean the hub face thoroughly before fitting, and check that the wheel studs and lug seats are sound. Inspect the front caliper slides and seals at the same time for smooth operation.
- Clean the hub mounting face before fitting
- Choose pads suited to slotted rotors
- Check caliper slides for free movement
- Replace worn rotors and pads as a pair
Specifications
| Brand | Power Stop |
|---|---|
| Part number | EBR698XPR |
| UPC | 70000695788 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Front |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It fits these vehicles and trims: 1999, 2003–2004 Land Rover Discovery (HSE, S, SD, SE); 1999–2002 Land Rover Discovery Series II (LE, SD, SE); 2001–2002 Land Rover Range Rover (HSE, SE).
Measure the old rotor’s diameter, thickness, bolt pattern and weight before buying.
The Range Rover is covered for 2001–2002 and the Discovery for 1999 and 2003–2004. Years outside those ranges fall outside the fit, so verify your model year before ordering.
Installation notes
Drilled and slotted rotors work best with pads the pad maker approves for them, so check pad compatibility before assembly.
What’s included
This is a single front rotor with no other parts in the box.
Not included: Any pads, hardware or sensors your vehicle needs are separate from the rotor.









