Overview
The Power Stop JBR935XPR is a front slotted and cross-drilled brake rotor for the 2001–2007 Toyota Sequoia and the 2000–2006 Toyota Tundra. This Evolution rotor is a direct-fit part that adds drilled holes and slots to the rotor face.
The holes help keep temperatures down in hard braking, while the rounded slots sweep water, gas and dust away from the pad. The rotor is G3000 grade cast, machined with Tru-Cast technology, mill balanced and silver zinc plated.
Two figures show how accurately the rotor is made. Run out is the side-to-side wobble of the face during rotation, and DTV is disc thickness variation. For this part Power Stop states run out within 0.0015 and DTV tolerance within 0.005. Direct fit means no modification is needed.
Drilled holes and slots are separate features on this rotor. The holes are aimed at temperature, the slots at keeping the surface between pad and rotor clear, and Power Stop says together they reduce fade. The company also points to the look of the rotor behind custom or factory wheels.
Key features
- Cross-drilled holes designed to lower rotor temperature
- Rounded slots that clear water, gas and dust from the pad contact patch
- Beveled, precision-drilled holes for extreme braking
- Rotor run out within 0.0015 and DTV tolerance within 0.005
- Mill balanced and cast in G3000 grade
- Silver zinc plating that resists rust in normal operation
- Fade reduction and a performance look behind factory or custom wheels
Caring for the front pair
Front rotors on full-size trucks and SUVs work hard, particularly when towing a trailer down a grade. Drilled and slotted faces can help manage heat and debris, but they also expose more of the rotor surface to wear and temperature changes. Matching the pads to the rotor and keeping the friction surfaces clean is what lets the pattern perform as designed over time.
Inspect the new front rotors at every pad change. Look for hairline cracks around the drilled holes and along slot edges, a lip forming at the outer rim, or scoring that deepens in the same spots on each pass. When braking pulses through the pedal, check the hub face for rust or debris before blaming the rotor itself, since a poor mounting surface can cause the same feel.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR935XPR |
| UPC | 792088560872 |
| Product type | Brake rotor, front |
| Rotor design | Slotted and cross drilled |
| Casting grade | G3000 |
| Coating | Coated (silver zinc plated) |
| Location | Front |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2001–2007 Toyota Sequoia and the 2000–2006 Toyota Tundra in the front position.
Sequoia and Tundra years outside these ranges are not covered. Verify your year, model and trim before ordering.
Installation notes
Replace both front rotors as a pair and fit new pads at the same time. Bed the pads in gradually before heavy braking, particularly when the truck is used for towing.









