Overview
The Power Stop AR8745 is an OE style replacement brake rotor for the 1999–2001 Jeep Cherokee (XJ), 2004–2006 Jeep Wrangler (LJ) and 1999–2006 Jeep Wrangler (TJ).
A brake rotor is the disc the brake pads clamp against to slow the vehicle. This OE style replacement has a smooth surface finish, which helps the pads bed in with less break-in time, and it is a direct-fit part.
It is mill balanced for durability, suited to non-aggressive driving, and designed for quiet operation, low dust and long pad life. Confirm the axle position, diameter and thickness against the rotor being replaced before fitting.
Key features
- OE style replacement rotor
- Smooth surface finish for less pad break-in time
- Detailed castings with extractor and set screw holes where required
- Mill balanced for long-lasting durability
- Suited to non-aggressive driving
- Designed for quiet operation with low dust and long pad life
- Designed to resist warping or cracking
OE replacements in everyday use
An OE style rotor is designed to restore the braking behavior the vehicle had when new, with dimensions and friction surface intended to suit everyday driving. For owners who mainly drive on pavement, that consistency matters more than aggressive performance. Smooth faces are easier on pads and less prone to dust build-up, which suits a daily driver.
When fitting, clean the hub face and remove any rust that would prevent the rotor from seating flat. Castings with extractor and set screw holes make removal easier when a rotor is seized, so check whether those holes are needed on the vehicle. Pads should be matched to the rotor, and the pair should be bedded in gradually after the first stops.
- Clean the hub face before fitting
- Use the set screw holes to free a seized rotor
- Bed in the pads gradually after installation
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8745 |
| UPC | 792088361646 |
| Product type | OE style replacement brake rotor |
| Surface finish | Smooth |
| Balancing | Mill balanced |
| Extractor and set screw holes | Where required |
| Intended driving | Non-aggressive driving |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Power Stop AR8745 covers these vehicles:
- 1999–2001 Jeep Cherokee (XJ) (Classic, Limited, SE, Sport)
- 2004–2006 Jeep Wrangler (LJ) (Unlimited, Unlimited Rubicon)
- 1999–2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X)
The list does not include the Wrangler TJ before 1999, nor Wrangler YJ, JK or JL models. Cherokee (XJ) coverage is limited to 1999–2001. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Brake rotors directly affect stopping, so have them fitted by a qualified professional.
- Replace rotors in pairs across the same axle.
- Bed in new brake parts as the manufacturer directs, and re-check fasteners and brake performance after the first miles of driving.
- Confirm whether the AR8745 is for the front or rear axle on your vehicle before installing.









