Overview
The Power Stop AR8768 is an OE style replacement brake rotor for the 2003–2007 Jeep Liberty (KJ) and the 2003–2006 Jeep Wrangler (TJ). It is a direct fit, mill balanced, with a smooth surface finish that shortens pad break-in time.
Detailed castings include extractor and set screw holes where the application needs them, and the rotor is meant for non-aggressive driving.
Rotors and pads wear together, so many owners replace both at the same time rather than mixing new pads with worn rotors.
Key features
- OE style replacement rotor
- Smooth surface finish for less pad break-in time
- Detailed castings with extractor and set screw holes where required
- Mill balanced
- Intended for non-aggressive driving
- Quiet operation with low dust and long pad life
- It is designed to resist warping or cracking.
Before you buy
Brake rotors and pads wear as a pair, so the rotor face is only as good as the pad riding on it. Before ordering, look at the friction surface for deep grooves, a blue tint from overheating, or a raised lip at the outer edge. Any of those signs means the old rotor has reached the end of its useful life and should be replaced rather than pushed further.
A rotor sized for non-aggressive driving suits daily commuting and light trail use. Heavy towing or repeated hard stops generate more heat than a standard rotor is built to handle, so a heavier-duty rotor is worth considering for that work. Runout problems often come from a dirty hub face or a worn wheel bearing rather than the rotor, so clean and inspect those parts whenever the rotor comes off.
- Clean rust and debris from the hub face before mounting
- Apply anti-seize to the hub only, never the friction surface
- Tighten lug nuts in a star pattern
- Inspect brake hoses and caliper slide pins while the wheel is off
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8768 |
| UPC | 792088577947 |
| Product type | OE style replacement brake rotor |
| Fit type | Direct fit |
| Surface finish | Smooth |
| Balance | Mill balanced |
Vehicle fitment
It fits the 2003–2007 Jeep Liberty (KJ) in 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition and Sport trims, and the 2003–2006 Jeep Wrangler (TJ) in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Measure the rotor you are replacing and compare its diameter, thickness, bolt pattern and weight before ordering.
It fits 2003–2007 Jeep Liberty (KJ) and 2003–2006 Jeep Wrangler (TJ) models only. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Replace the brake pads on the same axle when fitting new rotors, then bed the pads in with a gentle break-in cycle.
What’s included
It is a single brake rotor, and no additional parts are included with it.
Not included: Brake pads, calipers and hardware are separate items and are not included with the rotor.









